User manual

Technical parameters
Assembly instruction
1. Connect the wire connector of the body (1A) with the wire connector of the base (2A).
2. Insert the body (1) into the opening in the base (2) up to about 65 mm (the right depth is marked on the body with a horizontal line).
3. Fix the body (1) to the base (2) with Allen screws (3), remember to use the washers (4).
4. Connect the plug to a standard 230 V socket.
CAUTION!
All assembly works should be carried out by a qualified person. The installation should be performed according to the diagram. A correctly
installed lamp is ready to use after connecting to the mains. For 2nd class protection against the electric shock ensure that the ground wire
is neither damaged nor broken. DC power supply applied in the LED lamp is protected against short-circuit and overload. The maximium power
consumption is 15 W. For such low energy consumption the lamps emit 720 luminous flux [Lm]. For comparison: the luminous flux
of a standard 60 W bulb is 710. Moderno lamp efficiency is almost 4 times higher compared to a standard incandescent lamp. In case the outer
flexible electrical cord gets damaged, it must be replaced by the lamp manufacturer, authorized service or a qualified person to avoid the risk
of electrical shock.
Electrical wiring diagram
Lamp dimensions
MODERNO ELEGANTE Floor lamp 11 W MODERNO ELISSE Floor lamp 11 W
Colour
temperature
Rated voltage
720 lm
3 x 3,5 W LED 4500
– 5500 K
3 x 3,5 W LED 3000
– 3500 K
Rated power
Material
11 W
Protection class
L, N, PE
II
Type of switch
Ingress protection
foot-operated switch ON/OFF
IP20
– interiors only
Weight 9,3 kg
Conformity with EMI standards
(emission)
Conformity with LVD standards PN-EN 60598-1:2007, PN-EN 60598-2-6:2000
PN-EN 61547:2002
Protection
against short-circuit and overload
Cool white
Index
Cool white
MODERNO ELEGANTE Floor lamp MODERNO ELISSE Floor lamp
Warm white
Warm white
Technical parameters
230 V AC 50Hz -15%, +10%
Luminous flux
Connection wires
Conformity with EMI standards
(resistance)
aluminum and glass
1660
280 305
1660
280
335
PN-EN 55015:2007, PN-EN 55015:2007/A1:2007
PN-EN 55015:2007/A2:2009
F
L
N
Electrical installation Lamp
AC
DC
MO–LST–A–W
MO
–LST–A–H ME–LST–A–H
ME
–LST–A–W
Najlepsza inwestycja w światło
The best investment in light
www.skoff.pl MADE IN POLAND
43-500 Czechowice-Dziedzice
ul. Legionów 243 D, POLAND
tel./fax [phone]
email: info@skoff.pl
www.skoff.pl MADE IN POLAND
43-500 Czechowice-Dziedzice
ul. Legionów 243 D, POLAND
tel./fax [phone]
email: info@skoff.pl