User's Manual Part 2


JadeOSUserManual7
Chapter3 CLI and System Management

JadeOSusesthecommandLineInterface(CLI)toimplementtheinteractionbetween
usersandtheoperatingsystem.Userscancompletearangeofsystemconfiguration
andrealizethemanagementfunctionsthroughtheCLI.
ThischapterdescribesCLIandsystemoperations.
3.1CLIAccess
Theconsole port on theequipmentis Rj45 interfaceandlocatedon thefrontpanel
ofeachlinecard.YoucanconnecttotheCLIvia thelocalconsoleorSSH/TELNETto
obtainaremoteconsole.
3.1.1CLIAccessviatheLocalConsole
ToconnecttotheCLIviathelocalconsoleport,completethefollowingsteps:
Step1ConnecttotheconsoleportusingtheRj45cableandserialportcable.
Step2Configureyourterminalemulationprogram(forex ample:SecureCRT)iscon‐
figuredasshowninfigure3‐1:

Figure3‐1Consoleportconnectionsettings
Step3Entertheusernameandpassword:
(JadeOS)
User: admin
Password: admins
.
Thepromptwillbedisplayedasfollowsafterlogginginsuccessfully.
(JadeOS) >