User's Manual Part 2



13JadeOSUserManual

YoucansaveconfigurationfilesintoJadeOSandcopytoanexternalserver.

copy startup-config flash: <filename>

copy startup-config tftp: <tftphost> <filename>

copy running-config flash: <filename>

copy running-config ftp: <ftphost> <user> <password> <filename>

[<remote-dir>]

copy running-config startup-config

copy running-config tftp: <tftphost> <filename>

3.5SystemUpdate

ThesystemimagefileisstoredintheCompactFlash(CF)oneachlinecard.Every

timeyoustartthesystem,bootloaderwillautomatica lly downloadtheimagetosys‐

temRAM.TheCFcardisdividedintotwopartitionswhichbothcontainthesystem

imagefiles.Atthefactorydefaultsetting,

bootloaderwilldownloadimagefilesfrom

partition0.Aftersystemupdating,JadeOSwillautomaticallystartfromthepartition

whichcontainstheupdatedimagefiles.Youcanalsospiffywhichpa rtition tostart

frommanually.Toupdatethesystemimagefile,completethefollowingsteps:

Step 1 Input the user name and password after connecting the JadeOS through

SSH,telnetorconsole.

Step2Turnintotheglobalconfigurationmodebyenteringthecommandconfig‐

ureterminal.

Step3Turnintotheinterfaceconfigurationmodebyenteringthecommandin‐

terf acemgmt.

Step4SetmgmtinterfaceIPaddressandmakesurethetftporftpserverisok.

Step5Copytheimagefiletopartition0/1onCFcard.

Thesystemwillrebootaftertheupdatecomplete.

Note:It’srecommendedthatyouupdatethesystemimagefilesfromthepartition

whichthesystemisnotworkingontoavoidthatthecurrentimagefilesare

erased.Forexample:ifthesystemisworkingonpartition0,pleaseupdate

thesystemimagefilesfrompartition1.

Tochangebootpa rtition, usefollowingcommandinConfigmode:

(JadeOS) (config)#boot system partition 0

To view image information about boot partition, use following command in enable

mode: