User's Manual Part 2


19JadeOSUserManual
Chapter4 InterfaceConfiguration 
Thischapterwilldescribehowtoconfigureinterface.
4.1NamingEthernetPort
GigabitEthernet <word>isGEport,andpar ameter‘word’formatis<slot/port>.‘slot’
means slot number, ‘port’ means port number. Both start with value 0 and range
dependsontherealnumberofEthernet.
For example, gigabitEthernet 1/0 ,  gigabitEthernet 1/1  and gigabitethernet 1/2  means
the firstEthernet port, thesecondEthernet portand the third Ethernet portofthe
firstslot.
Tengigabitethernet<word>is10Gport,andparameter‘word’formatisthesameas
GEport.
Toinquirypresentslotnumber,useshowslotcommand:
(JadeOS) #show slot
Slot12
 ‘slot12’meanspresentslotnumberis12.
4.2ConfiguringVLAN
JadeOSoperatesasalayer‐2switchthatusesaVLANasabroadcastdomain.Asa
layer‐2switch,JadeOSrequiresalayer‐3routertoroutetrafficbetweenVLANs.
4.2.1CreatingVLAN
YoucanconfigureVlaninvlanmode:
Step1Entervlanmodebyusingfollowingcommandinconfigmode:
vlan database
Step2Creatingvlan
vlan <id>
Note:Deletevlanbyusingnovlan<id>command.
Forexample：
(JadeOS)(config)#vlan database
(JadeOS)(config-vlan)#vlan 2
(JadeOS)(config-vlan)#vlan 3 name "VLAN3"
(JadeOS)(config-vlan)#no vlan 2