User's Manual Part 2


42JadeOSUserManual
(JadeOS-B) (config-if) #ip address 192.168.10.2/24
(JadeOS-A) (config-if) #ip ospf network point-to-point
(JadeOS-B) (config) #interface vlan 30
(JadeOS-B) (config-if) #ip address 192.168.30.1/24
(JadeOS-A) (config-if) #ip ospf network point-to-point
Step4ConfigureOSPF on JadeOSC
(JadeOS-C) (config) #router ospf
(JadeOS-C) (config-router) #ospf router-id 1.1.1.3
(JadeOS-C) (config-router) #network 192.168.20.0/24 area 1
(JadeOS-C) (config) #interface vlan 20
(JadeOS-A) (config-if) #ip ospf network point-to-point
(JadeOS-C) (config-subif) #ip address 192.168.20.2/24
Step5ConfigureOSPFonJadeOSD
(JadeOS-D) (config) #router ospf
(JadeOS-D) (config-router) #ospf router-id 1.1.1.4
(JadeOS-D) (config-router) #network 192.168.30.0/24 area 2
(JadeOS-D) (config) #interface vlan 30
(JadeOS-D) (config-subif) #ip ospf network point-to-point
(JadeOS-D) (config-subif) #ip address 192.168.30.2/24
Note:RoutingmanagementsupportsOSPFdynamicroutingmanagementandstaticrouting
management.
Toaddstaticrouting,useiprouteA.B.C.D/<destmask>command.
Todeleterouting,usenoiprouteA.B.C.D/<destmask>command.
Todisplayrouting,useshowiproutecommand.
6.8ConfiguringIPv6
JadeOSsupportsIPv4/IPv6configurationandIPv6forwarding.IPv6addressandrout‐
ingconfigurationissimilar toIPv4.
6.8.1AddressConfiguration
ToconfigureIPv6address,usefollowingcommandininterfacemode:
(JadeOS) (config)#interface vlan 333
(JadeOS) (config-if)#ipv6 address 2011::6:31/64
6.8.2RoutingConfiguration