User's Manual Part 2


74JadeOSUserManual
centralized forwarding, AC authentication local forwarding and local authentication
localforwarding.
10.3ConfiguringPower
You can configure to automatically choose the power of AP and station in AC, the
configuringcommandisasfollows: 
transmit-power 0
ConfiguringRadioFrequency
Youcanmanuallyconfigur eradiofrequencyofAP,atthesametime,APcankeepthe
originalradiofrequencyinformationwhenAPonlineagainafterAPofflinenormally.
Forexample:
(JadeOS) (config)#radio dot11g-profile default
(JadeOS) (802.11g radio Profile "default")#channel 149
ConfiguringRadioPower
• JadeOSsupportsmanuallypowerregulation.Forex ample
(JadeOS) (config)#radio dot11a-profile default
(JadeOS) (802.11a radio Profile "default")#transmit-power 10
(JadeOS) (802.11a radio Profile "default")#transmit-power 20
•
JadeOSsupportsautomaticallypowerregulation.
(JadeOS) (802.11a radio Profile "default")#transmit-power 0
10.4ConfiguringRadio
YoucanautomaticallychoosetheworkingchannelofAPandstation.Forexample:
channel 0
10.5DTLSandCA
DatagramTransportLayerSecurity (DTLS) is based on the standard IETF protocol in
TLS. CAPWAP control message and part of CAPWAP data message are using DTLS
encryptionmechanismofUDPlayer.Theconfigurationcommandisasfollows:
dtls
ImportCA