User's Manual
22JadeOSUserManual
Inquire LAG by using show Interface port-channel <id> command:
(JadeOS)#show interface port-channel 2
Port-Channel 2 is administratively up
Hardware is Port-Channel, address is 04:8B:42:10:0D:0B (bia 04:8B:42:10:0D:0B)
Description: Link Aggregate (LACP)
Spanning Tree is disabled
VLAN membership: 190
Switchport priority: 0
Member port:
GE 4/3, Admin is up, line protocol is up
GE 4/4, Admin is up, line protocol is up
link status last changed 0 day 0 hr 16 min 46 sec
106198 packets input, 21374111 bytes
Received 124 broadcasts, 0 runts, 7483 giants, 0 throttles
11936475 input error bytes, 545 CRC, 0 frame
82048 multicast, 24026 unicast
14148 packets output, 432640 bytes
0 output errors bytes, 0 deferred
0 collisions, 0 late collisions, 0 throttles
Port-Channel 2 is TRUSTED
Delete LAG by using no interface port-channel <id> command:
(JadeOS)(config)# no interface port-channel 0
The port channel can be set in access mode or trunk mode. By default, a port channel
is in access mode and carries traffic only for the VLAN that is assigned. In trunk
mode, a port channel can carry traffic for multiple VLANs.
¾ Configure Port Channel in access mode
(JadeOS)(config)#interface port-channel 1
(JadeOS)(config-if)#switchport mode access
(JadeOS)(config-if)#switchport access vlan 2
¾ Configure Port channel in trunk mode
(JadeOS)(config) #interface port-channel 2
(JadeOS)(config-if)#description Portchannel2
(JadeOS)(config-if)#switchport mode trunk
(JadeOS)(config-if)#switchport trunk native vlan 5
(JadeOS)(config-if)#switchport trunk allowed vlan 6-9,10