User's Manual


68JadeOSUserManual
(JadeOS) (RADIUS Server "r1") #source-interface vlan 30
(JadeOS) (config) #aaa server-group g1
(JadeOS) (Server Group "g1") #auth-server r1
Step 8 Configure aaa profile
(JadeOS) (config) #aaa profile ABC
(JadeOS) (AAA Profile "ABC") #web-auth-server-group g1
(JadeOS) (AAA Profile "ABC") #rfc-3576-client 210.151.12.118
(JadeOS) (AAA Profile "ABC") #initial-role pre-auth
(JadeOS) (AAA Profile "ABC")#web-auth-default-role post-auth
(JadeOS) (AAA Profile "ABC")#post-auth idle-time 300
(JadeOS) (AAA Profile "ABC")#post-auth lifetime 300
(JadeOS) (AAA Profile "ABC")#pre-auth idle-time 300
(JadeOS) (AAA Profile "ABC")#pre-auth lifetime 300
Step 9 Apply profile to VLAN
(JadeOS) (config) #vlan 30 aaa-profile ABC
9.12 Trouble Shooting
When JadeOS is in trouble, user can locate problem by viewing user list. To view user
list, use show user-table command. For example:
(JadeOS) #show user-table
Auth User Table Entries
-----------------------
Flags: O - Post-auth, E - Pre-auth, W - Web-auth, P - RADIUS proxy,
C - Accounting, m - Pre-MAC-auth, M - Post-MAC-auth, R - L3 roaming,
o - Open, w - WEP, c - CCMP, t - TKIP, a - WPA, n - RSN, x - 802.1X, L - Station leave
No. IP-addr MAC-addr Type Flags Age(d:h:m)
User-name
--- ------- -------- ---- ----- ----------
---------
(JadeOS) #show user-table
(JadeOS) #show datapath user table
Datapath User Table Entries
---------------------------
Flags: P - Permanent, W - WEP, T- TKIP, A - AESCCM, G - AESGCM, V - ProxyArp to/for MN(Visitor),
N - VPN, L - local, Y - Any IP user, R - Routed user, M - Media Capable,