User's Manual


72JadeOSUserManual
10.3 Configuring Power
You can configure to automatically choose the power of AP and station in AC, the
configuring command is as follows:
transmit-power 0
Configuring Radio Frequency
You can manually configure radio frequency of AP, at the same time, AP can keep the
original radio frequency information when AP online again after AP offline normally.
For example:
(JadeOS) (config)#radio dot11g-profile default
(JadeOS) (802.11g radio Profile "default")#channel 149
Configuring Radio Power
• JadeOS supports manually power regulation. For example
(JadeOS) (config)#radio dot11a-profile default
(JadeOS) (802.11a radio Profile "default")#transmit-power 10
(JadeOS) (802.11a radio Profile "default")#transmit-power 20
• JadeOS supports automatically power regulation.
(JadeOS) (802.11a radio Profile "default")#transmit-power 0
10.4 Configuring Radio
You can automatically choose the working channel of AP and station. For example:
channel 0
10.5 DTLS and CA
Datagram Transport Layer Security (DTLS) is based on the standard IETF protocol in
TLS. CAPWAP control message and part of CAPWAP data message are using DTLS
encryption mechanism of UDP layer. The configuration command is as follows:
dtls
Import CA
Import CA in server into AC, which means transferring the CA format into another
format that can be recognized by DTLS control channel and remove the password.
For example:
(JadeOS) #copy ftp 1.2.3.4 user cert_file flash sc-file-1