User Manual

• The person joining the session will power their buds ON and can either be in a connected or non-connected
state, they will press the button on their LEFT earbud for 3s to initiate, and will hear the voice prompt “Joining
Audio”.
• Please be patient as it sometimes takes about 5 seconds to begin the Audio Share streaming for the user
joining the session.
Can I customize the action buttons for the Share Audio feature?
• No, this is a locked UI action and you cannot change this default button function.
Do both users still have full media controls and voice control?
• No, only the user sharing audio will maintain their hands-free voice control, track control, and play/pause
capability.
• Both users will still have independent volume controls and the ability to end the Audio Share session by
powering off the buds, or repeating the same button action sequence they used to begin their session.
What is the suggested BT range for the optimal Audio Share experience?
• It is recommended users remain within 5m (about 15ft) to ensure a clear connection.
If the session does disconnect for any reason, can I rejoin the same session?
• No, both users will need to restart the Audio Share session if the sync is lost.
Hands-Free Voice Control
Will voice control work right out of the box?
• No, the user will need to first download the Skullcandy APP and link their SKULLiQ enabled product to the
APP to enable hands-free voice control.
• The user will be notified with a voice prompt, “Voice Control ON” when enabled. They will also be able to
turn ON and OFF in the APP as desired.
Do I need to always keep the Skullcandy APP open for Voice Control to function?
• iOS users will only need to keep the APP running in the background to maintain voice control functionality.
• Android users will be able to link to the APP and close the APP while still maintaining hands-free voice
controls.
• The user will always be notified if their voice controls are ON or OFF via a voice prompt during power up
and when enabling and disabling in APP.
Sometimes I hear the tone that indicates voice controls were “listening”, is there something wrong with my
product?
• No, this is normal, but should not be a common occurrence. This is called a “false trigger” and it is when
your earbuds may hear a phrase that sounds like, “Hey Skullcandy”. Although it should not impact your
everyday use, it may occasionally happen.
Do I need to speak loudly for this feature to work?
• No, you should be able to speak normally in most scenarios for the mics to hear your commands. Though
situation dependent, you might need to speak a little bit louder in noisy or windy environments.
Will my voice controls always work perfectly?