User Manual

• Spotify APP Required
Once paired to the Skullcandy APP and Hands-Free Voice Control is activated, you will also be able to launch Spotify
and immediately begin streaming by saying, “Hey Skullcandy, Spotify”.
SHARE AUDIO:
Easily share your music or media with a friend, anytime and anywhere through our new Share Audio feature.
To Share Audio, both users must have SKULLiQ enabled products, be in Stereo Mode (using both earbuds), and be
within Bluetooth range. For best results, we recommend both users stay within 5 meters (about 15 feet) during an
Audio Share session. Please also note the audio share between users may take up to 5 seconds to sync.
The person that wants to share their audio must have their earbuds connected to a device. They will press and hold the
button on their RIGHT earbud for 3 seconds. A voice prompt will notify the user that they are now “Sharing Audio”.
Only the user sharing audio will still maintain their ability to utilize their Hands-Free Voice Control functionality and
track controls.
The person that wants to join will press the button on their LEFT earbud for 3 seconds, and they can be in either a
connected or non-connected state. A voice prompt will notify the user they are now “Joining Audio”. Once connected,
the user joining will not have voice control or track control functionality.
Once the share is complete, audio will begin to stream automatically and each user will have the ability to adjust their
volume independently through their earbuds.
Either party can disconnect from the Audio Share by placing their earbuds into the case and closing the lid, powering
the earbud off manually, or repeating the 3-second hold you used to share or join the stream.
To continue the Share session if either user is disconnected, both parties will need to start over.
Share Audio:
• Press and hold 3s on the right earbud to “Share” your audio (must be connected)
• Press and hold 3s on the left earbud to “Join” audio (can be connected or in a disconnected state)
SKULL-iQ & THE SKULLCANDY APP
To unlock all of the incredible Skull-iQ features, scan the QR code on the front of your packaging or in your Quick
Start Guide to quickly download the Skullcandy APP.
Once you have paired your earbuds to your device, open the Skullcandy APP and you will automatically link. You
now have the ability to enable hands-free voice control, customize your control settings, access user guides, and update
new features when they become available.
It is very important to be sure you’ve updated your earbuds to the latest firmware release to ensure the best performance
and user experience. You will be notified when an update is available, but please don’t forget to take this time and
improve your product with the most up-to-date upgrades and features.
HANDS-FREE VOICE CONTROL
For both Android and iOS, the Skullcandy App is required.
Once your earbuds have linked with the Skullcandy APP, Hands-Free Voice Control will be enabled each time you
power on and pair your device. You may also disable this feature in the APP at any time if desired.