User Manual

GRIND FUEL comes with 3 sizes of ear gels to help you find the best fit. Try each size of the provided ear gels to see
which fit works best for you.
Having Trouble? Don’t return to the store and let us help!
No Audio in one ear?
Let’s re-sync your earbuds by first placing both of them into the charge case and closing the lid for 2 seconds to ensure
they fully power OFF. Then simply remove both earbuds together, if the stereo audio stream hasn’t been fixed, please
follow the two options below.
Step One:
• On your device, open the Bluetooth settings and turn Bluetooth Off.
• Remove both earbuds from the charge case and ensure they are both powered ON.
• Press the button on both earbuds three (3x) times simultaneously. The LED will go through a series of pulses
as they re-sync. Five quick (5x) blue flashes will indicate a successful sync.
• On your device, open the Bluetooth setting back up, turn this ON, and select your previously paired “GRIND
FUEL”.
• LED’s in both earbuds will blink blue three (3x) times and a voice prompt will indicate a successful
connection.
If this step fails, or you are having pairing issues, please proceed to Step Two
PAIRING ISSUES? Reset your earbuds with the following steps.
Step Two:
• Remove the GRIND FUEL from your Bluetooth Paired Device list settings, and then turn the Bluetooth OFF.
• Remove BOTH earbuds from the case, a Tone and Voice Prompt will indicate your earbuds are Powered On.
• Press and hold ONLY the RIGHT earbud button for three (3) seconds.
• A tone will indicate a successful reset, and the RIGHT earbud will flash purple 3 times, a voice prompt will
say “Ready to Pair”, and both earbuds will pulse red/blue/
• On your device open your Bluetooth setting and turn Bluetooth ON. In the available devices select GRIND
FUEL and accept the “Pair” or “OK” prompt that appear on your screen. When pairing is complete, a voice
prompt will say “connected.
BUDS NOT CHARGING IN CASE/CASE LID NOT CLOSING PROPERLY?
Issue: Not seeing the LED indicator on the buds when you’ve placed your GRIND FUEL back in the charging case?
Solution:
• Check to see if any debris is blocking the charging pins at the bottom of the case, or on the bud.
• Check to see if the removable in-ear gels have been twisted or are falling off. This could be keeping the buds
from sitting correctly in the case. If you’re having a hard time closing the lid completely, it is likely because
the earbuds are not set correctly or the gels are interfering.
• Check the battery level fuel gauge on the charging case to ensure the case is holding a charge.
FREQUENTLY ASKED QUESTIONS
NEW FEATURES AND SKULLiQ
Please note that SKULLiQ and the Skullcandy APP will only be supported on your mobile devices, and will not have
APP support with your PC, iPad and MacBook.