Smart Watch User Manual Please read the manual before use.
1. Safety Warning ◆ The information in this document won’t be modified or extended in accordance with any notice. ◆ The watch should be charging 2 hours at least before use Security Code ◆ The original code is 1122. This code can prevent your watch in use by others without your permission. ◆ Please change the original code to insure your personal information safe. 2. Product details: 2.
Method 1: Power on, when the watch in clock mode, please click middle screen and set different clock interfaces if you like. Method 2: Power on, Main menu: setting—watch setting—standby menu display—Wallpaper display. 3. Product quick use 3.1 Download the Sync software. Scan QR code in your smartphone using any QR scanner from Google Play Store. Download the APP which can match your android phone. This APP only use for the Sync between watch and phone.
Android application usage (already installed) (Smart phone) Setting—Accessibility—Enter into Bluetooth notice (service), enabled this service. (Please choose “sure” when shown a warning notices) the application runs on the background automatically and sync function will be switched on Click the Bluetooth notices and choose the Notification service, select your Personal or System application in Notify application. Telephone Calls service is including SMS, incoming call and localize your watch.
convenience when you connect next time (without remind again). Notice: The Sync software can open in sync APP already installed and Accessibility, the mobile will show Bluetooth connected done after 2-5 min; the watch will inform you the time of Sync with phone, then the Sync switched on. The message will sync to you watch when it incoming to mobile. 3.3.2 From watch to phone BT dialer on Smart watch ---Search new device—found your smart watch (such as Q18)—connect the processes of next are same with 3.3.
3.4.5 remote notifier (Only for Android users) When there is SMS, the watch phone will alert you to read them. 3.4.6 Remote Camera Watch camera can control smart phone camera. Via Bluetooth synchronization 3.4.7 Anti lost Watch to find the phone, or phone to find watch. 3.4.8 Setting Notice: sets clocks display and theme in phone setting. In the security Settings. The safe code is 1122. 3.4.
4.1 Full change before use, the charge time need 1-2 hours. 4.2 Use the accessories cable and charger, or your android phone accessories. 4.3 Bluetooth will disconnect when exceed the distances, after switch on the Anti lost. The smart search function can’t be use before reconnecting with Bluetooth. 4.4 Please reconnect with BT if it’s disconnected occasionally (please Manual connect if the Bluetooth disconnect over 5 minutes). Please agree the phone book Sync otherwise there is no called phone book. 4.
The battery’s life will be reduced after few years, please check if the battery is working. Change a new charger if it is unworkable. Please check the USB slot connecting good, if no, please try again. 5.4 No caller’s name when incoming call Forgot to choose to upload the phone book when connected with BT, or unselected keep upload the phone book. Forgot to sync the phone book when reconnected, please pair the device and connect BT again. 5.
party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Consult the dealer or an experienced radio/TV technician for help.
