User's Manual

10
Remove optional inner temporary
adhesive for camera positioning and
use leveler to align and balance back
plate. You can use a pencil or Position
Sticker (included) to mark placement
before adhering to your wall.
Refer to Option 1 to mount camera
to wall with adhesive or Option 2 to
mount camera to wall with screws.
STEP 2 Mounting the camera’s back plate
After using the Leveler to adjust
the balance of the plate, adhere
the Positioning Sticker to mark
the center of the plate.
Remove and flip plate to remove
outer adhesive from back plate
for a more stable placement of
the camera to the wall.
Align back plate with the
Positioning Sticker on the wall
to center the plate.
1 2 3
OPTION 1 Mounting with adhesive
Toucan user manual24_wo.indd 10 31/3/2016 10:30 AM