User's Manual

12
STEP 3 Camera body installation
Plug USB Cable into the back of
the camera and loop the cable
around the rings; continue
looping the cable if necessary.
Mount the camera to the back
plate and align the white dot to
the left of the screw where the
white arrow starts and rotate
camera counter-clockwise to lock.
Manage the cable with
optional Conduit. Then attach
the Cover to the top of the
conduit/mount plate.
Tighten the security screw with
hexagonal wrench. Do not
over-tighten the security screw.
Attach Visor to the top of the
camera lens.
Position camera and use
Cable Clips to manage the
cable if necessary.
1
4
2
5
6
3
Mount Plate
Cover
Conduit
Cover
LOCK
Toucan user manual24_wo.indd 12 31/3/2016 10:30 AM