User's Manual

you start using your device, it is recommended that

you install and charge the battery. Some batteries

perform best after several full charge/discharge

cycles.

 Plug the DC end of adapter to the micro USB

port of the device and plug the AC end to the

wall socket for charging.

 Normally it takes approximately 3~5 hours to

fully charge the device. Operating the device

during charging with the AC adapter may extend

the time of full charging.

6 Power on / Power off

1) To turn on the device, press and hold the Power

button until you see the start-up screen then

release, it will automatically enter the Home

screen. If it is the first time to use it, it will enter

set-up guide menu. Please follow the on-screen

instructions.

2) Press the Power button once to enter sleep mode

and press it again to open the device.

3) Press and hold the Power button, and then tap on

OK to power off the device.