Smart Watch User Guide Please read the manual before use.
The information in this document won't be modified or extended in accordance with any notice. The watch should be charging 2 hours at least before use. 1. Product specs Model: SKY WATCH 1 2G GSM/GPRS 850/900/1800/1900 with micro SIM Memory: RAM 16MB+ ROM 8MB, support micro SD up to 32GB Capacitive touch IPS screen 1.54‖ 240*240 pixel Bluetooth version 4.0 Camera 0.
menu Touch screen: each function (main menu) will be shown and displayed on capacitive touch screen.
SD and SIM: Install micro SD card and micro SIM card Install battery 2.
You can enter into next page by sliding screen up, and return to last page by sliding screen down; enter into the sub-menu after clicking selected menu, and return to upper menu after sliding from left to right. It is will be in mistake for a click if the drag distance too short. 2.3 Clock Display Setting method: Method 1: Power on, when the phone in clock mode, please long press middle screen and set different clock interfaces if you like.
your iphone. Search Fundo Wear APP in Google Play Store, down load the APP and install it in your android phone. This APP only use for the Sync between watch and phone, will not take your data service. If you already download the related software, please check the version and use the newest related software in order to ensure all function normal use. Please update the software when it has new one. 3.
Open Fundo Wear APP; select your Personal or System application in Notify application. Telephone service is including SMS, incoming call and seek watch. Notice: Please don’t shut the Bluetooth notify service when you are clearing software by background or close background application software. It will affect the Sync function between watch and phone if shut it. 3.3 Bluetooth Connection and Sync function 3.3.
‗‘yes ‖in your mobile phone, paired done. Please choose ―sure‖ when there is phone book request , meanwhile you‘d better choose‖ no remind again‖, this is convenience when you connect next time( without remind again), Notice: The Sync software can open in sync APP already installed and Accessibility, the mobile will show Bluetooth connected done after 2-5min; the watch will inform you the time of Sync with phone, than the Sync switched on. The message will sync to you watch when it incoming to mobile. 3.3.
3.4 Base function 3.4.1 Message Sync phone or watch message. 3.4.2Calls records You can check your phone call records after you connect with the Bluetooth. Shown all records including miss call, dialed calls and receive call; you can check the date, time and phone number of the miss call after you choose it, but only can call this number. 3.4.3 BT connection Paired devices from smart watch 3.4.
Use phone camera take photos, but remote by watch, its need switch on the camera of phone in advance. 3.4.6 Find my device Watch seek phone. 3.4.7Setting 3.4.8 Pedometer It can be adopted as a tool to avoid insufficient or excessive exercise by measuring calories or calories consumption based on collected data, such as number of steps, distance, speed, time, etc., to control exercise. If you want return to main menu but keep pedometer during the exercise, please press the power button. 3.4.
You can set a time to remind you up to do some exercise, we suggest you this time could be one hours. 3.4.11 Quick response It can download sync software when scan the quick response, if there is a new version need to update, please contact with our servicer, our company will provide a new link for your download. 3.4.12 Alarm 3.4.13Calendar 3.4.14Calculator 3.4.15File manager 3.4.16Music player Can play music smart phone after connect with Bluetooth. 3.4.
3.4.18Video recorder 3.4.19Image viewer 3.4.20Video player 3.4.21Sounder recorder 3.4.22 Motion 3.4.23 Power saving 4. Notice 4.1 Full charge before use, the charge time need 1-2 hours. 4.2 Use the accessories cable and charger, or your android phone accessories. 4.3 Bluetooth will disconnect when exceed the distances, after switch on the Find my device; the smart search function can‘t be use before reconnect with Bluetooth.
4.4 Please reconnect with BT if it‘s disconnected occasionally (please Manual connect if the Bluetooth disconnect over 5 minutes). Please agree the phone book Sync otherwise there is no called phone book. 4.5 When playing the music, some of music‘s name can shown and some can‘t, it is normal, because android phone are difference. 5. Common trouble shooting Please refer below key function for any problems with the watch,if the problem is still unsolved,please contact with our dealer or serviceman appointed.
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Measurement (NCRP) and the Institute of Electrical and Electronics Engineers (IEEE). In both cases, the recommendations were developed by scientific and engineering experts drawn from industry, government, and academia after extensive reviews of the scientific literature related to the biological effects of RF energy. The RF exposure limit set by the FCC for wireless mobile devices employs a unit of measurement known as the Specific Absorption Rate (SAR).
give additional protection to the public and to account for any variations in measurements. SAR tests are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum reported value.