Owner manual

4. SlidetheshortguidingrailontheMountingPlate(d1)intothe

 guidingrailslotontheDovetailBarClamp(d2)andsecureit 

in place using the hand knob as shown in Fig. 17.

Fig. 17

Fig. 18 Fig. 19

5. SlidetheDovetailBar(a)intothePortraitMountingPlate(d)andsecureusingthehandscrewasshowninFig. 18 and Fig. 19.

6. LoosenthealtitudeclutchknoblocatedontheAllViewmount’sforkarm,andturnthealtitudeaxissothatthedovetailholderin 

parallel to the ground. Retighten the clutch knob.

Note: When assembling the Portrait Mounting Plate (d), make sure that the Mounting Plate (d1) is positioned high enough to prevent the

¼-20 screw from obstructing the Dovetail Bar’s (a) path when you assemble the two pieces. Once the Dovetail Bar (a) is attached, you can

re-adjust this distance as needed.