Owner manual

16
5. The hand control will display “Step 1: Set Camera FOV…” and “Already know the FOV?”
 • Ifyoualreadyknowtheeldofviewofthecameralensyouareusing,Press1. The hand control will then ask you to use the
  numerickeypadtoentertheeldofview(indegrees)ofthehorizontalaxisrst.Whenyouaredone,pressENTER and edit
  theeldofviewoftheverticalaxis.
 • Iftheeldofviewisunknown,press 2.Thehandcontrolwillwalkyouthroughthestepsonmeasuringtheeldofviewof
  yourlensinboththehorizontalandverticalaxes.Ifyourcameraissoequipped,turnontheLCD’slivepreviewmode,
  otherwiseuseyourviewnder.Themountwillaskyoutousethedirectionalkeystomovethemountinthefollowingmanner:
 • Alignthetopframeofthecamera’sviewwiththehorizonandpressENTER
 • Alignthebottomframeofthecamera’sviewwiththehorizonandpressENTER
  Thehandcontrolwillnowdisplaythemeasuredeldofviewfortheverticalaxisofyourlens.Tocontinue,press 3.Ifyou
  wishtogobackandperformthemeasurementagain,press 1. The hand control will now prompt you to do the same for the
  horizontalaxis:
 • Aligntheleftframeofthecamera’sviewwiththeinitialcenteroftheviewandpressENTER
 • Aligntherightframeofthecamera’sviewwiththeinitialcenteroftheviewandpressENTER
  Thehandcontrolwillnowdisplaythemeasuredeldofviewforthehorizontalaxisofyourlens.Tocontinue,press 3.If
  youwishtogobackandperformthemeasurementagain,press1.Thehandcontrolwillshowbothvaluesandsavetheeld
  ofviewinformationforfutureuse.
6. The hand control will display “Step 2 HOME Position”andwillinstructyoutousethedirectionalkeystomovethecamerato
the central point of the panoramic photo you wish to take and press ENTER.
7. The hand control will display “Step 3 Set Pict Range.” Use the scroll buttons to choose between 360˚ Panoramic or Wide
Angle modes.
8. The hand control will again prompt “Set Pict. Range:” Use the scroll buttons to select “by Editing” or “by Measuring” the
range. Press ENTERonceyouhavemadeyourchoice.
 • When“by Editing”isselected,thehandcontrolwillaskyoutousethenumerickeypadtoenterthefollowinglimits
 (indegrees):
o RGT LMT-Howfartotherightofthecenterpointyouwantthepanoramicimagetogo
o LEFT LMT–Howfartotheleftofthecenterpointyouwantthepanoramicimagetogo
o UP LMT-Howfarabovethecenterpointyouwantthepanoramicimagetogo
o DOWN LMT–Howfarbelowthecenterpointyouwantthepanoramicimagetogo
Note: When working in 360˚ Panorama, the hand control will only ask for UP LMT and DOWN LMT
 • When“by Measuring”isselected,thehandcontrolwillprompttousethedirectionalbuttonstomovethecameraheadto
  measuretherangeofpanorama.Movethemounttotheupperrightcornerofthepanoramayouwishtotakeandpress
ENTER.Next,movethemounttothelowerleftcornerofthepanoramayouwishtotakeandpressENTER.Conrmyour
settings by pressing 1(Yes).
Note: If in 360˚ Panorama mode, you will only need to move the mount upward and downward to measure the limits of the picture range.