User's Manual

Fig 11

Fig 12

Fig 10

Fig 9

1.7Installing optional accessories to turn the EQM-35 PRO into the

EQM-35 PRO light photographic traveling version (fig 9, 10, 11

and 12)

1.7.1 Loosen the 4 M6 screws with hex socket head, which hold the DEC body, and

take off the DEC body.

1.7.2 Install the saddle head, and tighten with 4 M5 hex socket head screws. Pay

attention to put the saddle in the direction as shown in the picture.

1.7.3 Install the L shaped bracket in the saddle head, tighten locking screw hand wheel

and screw.

1.7.4 Put the counterweight & counterweight shaft in the threaded hole at the rear end

of the L shaped bracket.

1.7.5 Slide the small counterweight in the right position (see also 2.1)and tighten the

counterweight locking screw.

M5 screws

M6 screws

DEC body saddle head

L shaped bracket

saddle head

counterweight shaft

counterweight

locking screw

L shaped bracket

counterweight