User's Manual

4
2. Basic operating functions
1. Earphone operation
project
Left ear
Right ear
Boot up
TWS Bluetooth Earphone in the charging case, open the cover of the
charging case
Shutdown
1.
Put the TWS Bluetooth Earphone into the charging case and close the
cover.
2.
TWS Bluetooth Earphone without connections after 10 minutes
Brother pairing
The TWS Bluetooth Earphone is in the charging case, open the charging
case cover , the TWS Bluetooth Earphone is interconnected, and enters the
pairing state
Bluetooth pairing
(mobile
phone / device)
1.
After the TWS Bluetooth Earphone is paired, open the mobile phone,
Bluetooth search (pairing name TAOTRONICS SoundLiberty 80 ), and click
the pairing name to connect to the device.
2.
When the TWS Bluetooth Earphone is used again , the left and right
earphones will automatically connect back to the last paired
device after pairing.
3.
TWS Bluetooth Earphone monaural use, pick up one of the earphone,
another one stay in the charge case and close the cover, the earphone
connects back out TWS after the failure, 20S about enter pairing
mode, and then open the phone searches were paired Bluetooth
connection , Take out another earphone, it will automatically enter
binaural mode
4.
TWS Bluetooth Earphone in the charging case, double charging
case button to enter pairing mode
Bluetooth lost
1.
The TWS Bluetooth Earphone is connected to the mobile phone, and
the mobile phone turns off the Bluetooth at this time. After 10 minutes
after the earphone enters the pairing mode , the earphone
automatically turns off
2.
TWS Bluetooth Earphone connected to the phone, the connection
beyond the range of 10 minutes, enter reconnect mode , while the other
device pairing mode, the earphone automatically shut down at this time
Volume
Volume - : TWS Bluetooth Earphone when use one ear or right
ear, scovere down the touch control during call and music ( minimum