Mono Bluetooth Headset M99+ User Manual
Contents: 1. Product Overview ------------------------------------------------------------------- 1 2. Basic Operation --------------------------------------------------------------------- 2 3. Bluetooth Pairing and Connection -------------------------------------------- 3 4. Connection with Two devices ----------------------------------------------------- 4 5. LED Indicator ----------------------------------------------------------------------- 5 6.
1. Product Overview: Volume + Volume LED Indicator MFB (Multi Function Button) Digital Microphone Mute Button Package Contents： A. Bluetooth Headset M99+ x 1 B. Micro USB charging cable x 1 C.
2. Basic Operation: Button Function *If there is no pair record, power on will enter pairing mode automatically. If there is pair record, power on will enter reconnecting mode automatically, if it can not reconnect any device for over 20 seconds, it will enter pairing mode automatically. The actual reconnect time base on the pair record. Power on Power off Enter mode MFB In on status, long press 3 seconds to power off. In off status, long press 3-4 seconds to enter pairing mode.
3. Bluetooth Pairing and Connection: A. In off status, long press MFB 3-4 seconds to enter pairing mode with LED Blue & Red flash alternately. B. Search and click to connect “TaoTronics M99+” on your phone Bluetooth lists, LED change to Blue slow flash after connected, now you can play music from phone to headphone. C. You can press MFB/ volume+ / volume- on the Bluetooth headset to control the answer/hang up a call and play/pause of the music, next and previous songs, volume up and down.
4. Connection with Two devices: A. Follow part 3 to connect with first phone, then turn off the Bluetooth function of first phone. B. Long press MFB 3-4 seconds to pairing mode again with Red & Blue LED flash alternately. C. Search and click to connect “TaoTronics M99+” on your second phone Bluetooth lists, LED change to Blue LED low flash after connected. D. Turn on Bluetooth function of first phone, click to reconnect “TaoTronics TT-BH041” on Bluetooth lists. Headset is connected with two phones now.
5.
6. Charging Please charge the M99+ at once when the Red LED flash. Charging time is about 2 hours. Solid LED Red change to Solid LED Blue when full charged. Charge Connections Please connect to the M99+ charging port through the Micro USB charging cable, the charger can be used as car charger, travel charger, computer USB, etc. Charging with Charger Charging with PC Note: 1. Pls charge the M99+ at least one time every 2 months when don’t use it. 2.
7.
8. Product Specification: Bluetooth Version V5.0 Bluetooth Chipset QCC3020 Operation Range 10 meters Bluetooth Protocols HSP, HFP, AVRCP, A2DP CODEC Code SBC, AAC Battery Capacity 400mAh/3.7V Charging Time 2 hours Stand-by Time 400 hours Working Time About 34 hours (50% volume) Headset Net Weight 78.8g Headset Dimension 163.7*160.78*61.
8. Attentions and Q & A: A. How to reconnect and operation when failed to reconnect ? When M99+ connected with your mobile phone successfully at the first time, it will search and reconnect the paired device automatically when power on, If failed, please pair and connect again. The headset can reconnect in 10 minutes, if over 10 minutes will power off automatically, disconnect in long distance will notice “Your headset is disconnected”. B.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
