User Manual Bluetooth Headset BH-M91
Catalog 1. Product overview--------------------------------------------------------- ------------- 1 2. Primarily operation---------------------------------------------------------------------- 2 3. Bluetooth pairing--------------------------------------------------------- ------------- 3 3.1 Pairing to 2 devices---------------------------------------------------------------------- 4 4. Charging---------------------------------------------------------------------- 5 5.
1.Product overview Packing list: A. BH-M91 Bluetooth headset 1 pcs B. Car charger 1 pcs C. Micro USB charging cable 1 pcs D. Bag 1 pcs E.
2.Primarily operation Button Multi-Function Button (MFB) Function Primarily operation Power on/off Press and Hold the MFB for 3 seconds turn on/off M91. Pairing model In off status, press and hold MFB for 6 seconds until red and blue LED flash alternatively. Play/Pause music In playing the music, short press the MFB to play/pause the music. Phone function Incoming call, short press MFB to answer/end the call; press and hold the MFB to reject the call.
3 Bluetooth Pairing and connect A. In power off status, Press and hold Multi-function button 3 seconds to enter into pairing mode, blue and red LED flashes alternately. B. Turn on the phone’s Bluetooth function, search "BH-M91" Bluetooth device, click "BH-M91" to connect. After pairing connection successful, LED indicator Light turn to Blue ,and flashes once for three seconds , it can listen the music and phone via the headset.
3.1 One pairing two devices A.After pairing the first phone(computer, pad ),turn off the first connected phone’s Bluetooth function temporarily. B.Press and hold MFB to turn off M91. Then press and hold MFB 6 seconds to to enter into pairing mode blue and red LED flashes alternately . C.Open the second phone’s Bluetooth function, search "BH-M91" Bluetooth device, click "BH-M91" to connect. After pairing connection successful, LED indicator Light turn to Blue, and flashes slowly.
4. Charging When the red LED Light flashes please charging immediately. It need about 2 hours to charging. When the red LED light out , it meats the battery is full. Charging connect. Please using standard USB charging cable, using the Micro’s port to connect the M91,USB port to connect the USB charger(car charger、travel charger、computer USB etc) Pleas noted: *When you don’t use BH-M91,Please charging at least once every 2 months.
5. LED indicator Status LED displayed Power on Blue LED flashes 3 times Power off Red LED flashes 3 times Pairing status Red and blue LED flashed alternately Unconnected standby status Blue LED flashes twice every 5 seconds Connected standby status Blue LED flashes once every 10 seconds Playing music status Blue LED flashes once every 10 seconds Call status Blue LED flashes once every 10 seconds Low voltage Red LED flashes Charging Solid Red Fully Charged Red LED turn off 6.
7. Notes and Questions. A.One pairing two devices When connect with two devices, it just can playing one phone’s music. If you want to playing the other one, please pause or turn off the first one phone’s music. B.Power off automatically M91 will power off automatically when the Bluetooth no connect over 10 min. C. How to re-connect? Also how do to If it can’t re-connect. When BH-M91 connected successful with the Bluetooth device. It will re-connect automatically when the device turn on .
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.