S15 Bluetooth Speaker User manual S15 is a stereo Bluetooth Speaker with single diver, Bluetooth version V4.1+EDR, Support HFP v1.6, A2DP v1.2, AVRCP v1.4, Output power reach to 3W, support AUX input. ■ Button function.
Bluetooth mode: Short press: previous song. Long press: volume down Bluetooth mode: Short press: next song Long press: volume up Bluetooth mode: Short press to play / pause /answer / reject/cancel calls. Double click: redial the last called number Long press for 2 seconds: reject calls / Audio switch from phone to speakers. Long press for 2 seconds then release: voice-activated dialing (The function will not work if not release the button after 2 seconds).
A.Microphone B.Vol-/previous song C.Multi-function Button D.Vol+/next song E.Indicator light F.AUX side G.OFF side H.Bluetooth side. J.AUX interface I.Charging pot ■ LED indicator light Speaker Bluetooth turn on: Blue LED flashes 2 times. Speaker Bluetooth turn off: Red LED flashes 2 times. Bluetooth paring mode: Red & Blue LED flashes alternatively. Bluetooth unconnected mode: Blue LED flashes 2 times every 5 seconds. Bluetooth connected mode: Blue LED flashes once every 10 seconds.
B. Turn on Bluetooth of your phone and search “S15” device, click”S15” to pair, cell phone will show that “S15” is connected after a few seconds. C. Open the phone system music player, press speaker, press , MFB then can listen music from ,can control music play / pause, previous , song, next song, some download music player on cell phone may not support this function. D.
phone. D. if cell phone shows that have already paired with the speaker, but cannot listen music from the speaker or double press button cannot dial calls, pls turn off your Bluetooth on the phone and reopen Bluetooth, then click”S15”from the paired list to manual connect back for replay the music and dial calls. E,If “S15” in the Bluetooth list has been deleted, then please follow 3.2 instruction to operate again. 3.4 AUX cable input method of using A.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.