User's Manual

9. Attentions and Q & A
A． How to return connection? What if I can't connect back?How to
reconnect the remote disconnection?
When the M103 is connected to your mobile phone successfully, it will
automatically connect to your mobile phone every time you turn on the
phone. If the connection fails, please connect the M103 to your phone
again.After 10 minutes, the headset will be automatically turned off. After
being disconnected from a distance, you will report Your headset is connected
only once.
B. How to delete paired records?
Press the MFB and volume - on the earphone for 5 seconds at the same
time to clear the pairing record in the earphone. If the pairing record is
cleared, the connection cannot be called back, and you need to re-pair the
connection.
C. What’s the password for pairing?
Some connection devices require password for pairing, pls try 0000 or 8888 or
1111 or 1234.
D.What devices could charge for the headphone?
As long as the DC voltage meets 5V, current above 500mA car charger, travel
charger, computer USB, etc., can charge the M103.
E. How to do if can not power on or connection problem?
You can try charging reset, the method is: plug in the charging cable to
charge, you can complete the reset shutdown, restart after the normal use. If
it still cannot be used normally, contact customer service or the manufacturer
for technical support.
F. Why power off automatically?
No connection for over 10 minutes or battery voltage is less than 3.1V.
G.How does a three-way call work?
Short press the multi-function button to answer a new call and hang up the
current call.