User's Manual

GLS MT Installation
4/1/2004 VER 2.8 DOC
2
Forward
The purpose of this manual is to provide the installer with the proper
installation techniques required for secure installation of the Skybitz GLS
Mobile Terminal (MT). The Manual covers MT installation on the flat
aluminum roof of a trailer using the Skybitz Mobile Terminal Bracket and 3M
Very High Bond (VHB) adhesive. Installation of the Skybitz MT Safety
Tether is described as well.
This Procedure is not to be used for MT installations on Fiberglass or other
types of composite roof trailers. Contact Skybitz Customer Support for
information regarding MT installation on trailers with roof materials other
than Aluminum.
Following the installation conditions and procedures provided in this manual
is strictly necessary to ensure the MT bracket will form a safe and secure
bond to the roof of the trailer.
CAUTION!
Failure to follow these installation procedures could allow
the Mobile Terminal to separate from the vehicle resulting
in possible injury or death!
Important!
Should you have any questions or concerns regarding the Mobile Terminal
installation process, please contact Skybitz Customer Support.
Skybitz Customer Service [phone]
[e-mail]
Contact Skybitz prior to any deviations from the installation of the
MT as described in this manual. Skybitz will not be responsible for
any loss or damage caused by improper Mobile Terminal installation.