User's Manual
Part six
Joystick calibration
Click on the rudder value in the H16 helper to view, and refer to the value for calibration
① When the remote controlscreen is completely off, center the knob. Long press the C and D
keys in the six-position switcher, then slide the screen up and wake up the screen
② Release the C and D keys, and long press the D key. Calibration starts after the remote control
sending out sounds
③ After reaching the maximum and minimum values of the left joystick, right joystick, small
joystick and knob on the remote control, press the D key to exit the calibration mode
Part seven
How to show video & data transmission and telemetry
Take QGC as the example for reference to connect video/image transmission
Showing video/image from network port
① Click the setting icon in QGC
② Click “Normal”
①
②
③
④