Instruction Manual

ManualsBrandsSkyjacker ManualsCar7070

1979 - 1985 Toyota Pick Up

Single Steering Stabilizer

Installation Instructions

I-7070-7175 REV2 12-13

www.skyjacker.com

Pg 1

REQUIRED TOOL LIST:

• Safety Glasses

• Metric / Standard Wrenches & Sockets

• Tape Measure

• Torque Wrench

Before beginning the installation, thoroughly & completely read these instructions & the enclosed

driver’s WARNING NOTICE. Affix the WARNING decal in the passenger compartment in clear view

of all occupants. Please refer to the Parts List to insure that all parts & hardware are received prior

to the disassembly of the vehicle. If any parts are found to be missing, contact SKYJACKER

Customer Service at 318-388-0816 to obtain the needed items. If you have any questions or

reservations about the installation of this product, contact SKYJACKER

Technical Assistance at

318-388-0816.

Component Box Breakdown:

Part #: 7070 / 9070 / 7175 / 9175

Item # Description Qty Item # Description Qty

7900WS WHITE STEERING DAMPER 1 BTIE-K BLACK BOOT TIE 1

(Included With 7070 / 7175) (Included With 9070 / 9175)

9900WS SILVER STEERING DAMPER 1 HSS HYDRO SHOCK DECAL 1

(Included With 9070 / 9175) (Included With 7070 / 7175)

B10RS RED BOOT 1 SSD SILVER STABILIZER DECAL 1

(Included With 7070 / 7175) (Included With 9070 / 9175)

B10KS BLACK BOOT 1 HB-7070 HDWR BAG: 7070/7175/9070/9175 1

(Included With 9070 / 9175) I-7070/7175 INST SHEET: 7055 / 9055 1

BTIE RED BOOT TIE 1

(Included With 7070 / 7175)

Hardware Bag Breakdown:

Part # HB-7070

Item # Description Qty Item # Description Qty

83161 TIE ROD BRACKET 1 38FTN 3/8 FINE THRD LOCK NUT 1

516X1X134U 5/16 X 1 X 1 3/4 U-BOLT 1 38SAEW 3/8 SAE WASHER 1

38X112FTB 3/8 X 1 1/2 FINE THREAD BOLT 1 STEM BUSH-SST STEM BUSHING 4

516CTN 5/16 COARSE THRD LOCK NUT 2 142120 STAB WASH PKG 2

516SAEW 5/16 SAE WASHER 2

Summary of content (4 pages)

PAGE 1
979 - 1985 Toyota Pick Up Single Steering Stabilizer Installation Instructions www.skyjacker.com Required Tool List: • Safety Glasses • Metric / Standard Wrenches & Sockets • Tape Measure • Torque Wrench Before beginning the installation, thoroughly & completely read these instructions & the enclosed driver’s WARNING NOTICE. Affix the WARNING decal in the passenger compartment in clear view of all occupants.
PAGE 2
Installation: 1. Park the vehicle on a level concrete or asphalt surface with the front tires / wheels pointing straight forward. 2. Set the emergency brake & block the rear tires / wheels. 3. Install the body end of the new Skyjacker steering stabilizer onto bracket “A”. 4. Extend the new Skyjacker steering stabilizer shaft out 4”(exactly half way) & attach bracket “B” to the tie rod using the supplied u-bolt & 3/8” bolt. The supplied 3/8” bolt will be attached to the lower forward hole on bracket “B”.
PAGE 3
Final Notes: • After the installation is complete, double check that all nuts & bolts are tight. Refer to the following chart for the proper torque specifications. (Do not retighten the nuts & bolts where thread lock compound was used.) • Cycle the steering of the vehicle left to right & check all parts for adequate clearance. • After the first 100 miles, check all of the hardware for the proper torque & periodically thereafter.
PAGE 4
Jesus Forgives, Rocks don’t www.skyjacker.com Jesus Christ Died For You. Jesús murió por ti. For God so loved the world that He gave His only Son, so that everyone who believes in Him should not perish, but have everlasting life. Romans 3:23 “Porque tanto amó Dios al mundo, que dio a su Hijo unigénito, para que todo el que cree en él no se pierda, sino que tenga vida eterna.” Romanos 3:23 For all have sinned; all fall short of God’s glorious standard.