Owner manual

Hardware Bag Breakdown:
Part # HB-7154T (Included With 7154 / 9154
Item # Description Qty Item # Description Qty
140629 EB6 STUD BAG 1 12SAEW 1/2 SAE WASHER 2
HOURGLASS 5/8 5/8 SHOCK BUSHING 2 12FTN 1/2 FINE THREAD LOCK NUT 1
SSB5468-T STRG STAB TAPERED SLEEVE 1 81004 TAPERED SLEEVE, 1/2" I.D. 1
58SP 5/8" SPACER - 1 1/4" O.D. 1 142121 ES24 SLEEVE, 1.38" LONG 1
12X312FTB 1/2 X 3 1/2 FINE THREAD BOLT 1
I-7154-7156 Pg 2
Hardware Bag Breakdown:
Part # HB-7156T (Included With 7156 / 9156
Item # Description Qty Item # Description Qty
P837 STAB TAPERED STUD 1 12FTN 1/2 FINE THREAD LOCK NUT 1
140629 EB6 STUD BAG 1 12SAEW 1/2 SAE WASHER 2
HOURGLASS 5/8 5/8 SHOCK BUSHING 2 SSB5468-T STRG STAB TAPERED SLEEVE 1
12X114FTB 1/2 X 1 1/4 FINE THREAD BOLT 1
Installation:
1. Park the vehicle on a level concrete or asphalt surface with the
front tires / wheels pointing straight forward.
2. Set the emergency brake & block the rear tires / wheels.
3. Remove the OEM steering stabilizer & OEM bracket from the
cross member using a 18mm socket. (See Photo # 1)
4. Attach the new Skyjacker steering stabilizer bracket to the OEM
cross member using the OEM mounting holes & OEM hardware.
5. Part # 7156: Install the supplied 1/2" x 1 1/4” fine thread bolt,
washers, & nut in the remaining mounting hole. (See Arrow in
Photo # 2)
6. Install the new Skyjacker tapered sleeve into the tapered
mounting hole of the OEM drag link. With the new tapered sleeve
installed, insert the new Skyjacker tapered stud for Part # 7156.
(See Photo # 3) Insert the 1/2" x 3 1/2" bolt & spacer for Part
# 7154. Note: The new spacer is to be installed on the top side of
the OEM drag link.
Photo # 1
Photo # 2
Photo # 3