User guide

2014 Ram 2500 4WD

2013 - 2014 Ram 3500 4WD

Heavy Duty OEM

Steering Stabilizer

Installation Instructions

I-7014 2-14 Pg 1

Before beginning the installation, thoroughly & completely read these instructions. Please refer to

the Parts List to insure that all parts & hardware are received prior to the disassembly of the vehicle.

If any parts are found to be missing, contact SKYJACKER

Customer Service at 318-388-0816 to

obtain the needed items. If you have any questions or reservations about installing this product,

contact SKYJACKER

Technical Assistance at 318-388-0816.

REQUIRED TOOL LIST:

• Safety Glasses

• Metric / Standard Wrenches & Sockets

• Torque Wrench

www.skyjacker.com

Hardware Bag Breakdown:

Part # HB-7014

Item # Description Qty Item # Description Qty

HOURGLASS 5/8 HOURGLASS 5/8" X 1.5" BUSH 1 141509 ES25 SLEEVE, 1.50" LONG 1

HG58125 HOURGLASS 5/8" X 1.25" BUSH 1 142121 ES24 SLEEVE, 1.38" LONG 1

Component Box Breakdown:

Part #: 7014 / 9014

Item # Description Qty Item # Description Qty

7000WS WHITE STEERING DAMPER 1 BTIE-K BLACK BOOT TIE 1

(Included With 7014) (Included With 9014)

9000WS SILVER STEERING DAMPER 1 HSS HYDRO SHOCK DECAL 1

(Included With 9014) (Included With 7014)

B10RS RED BOOT 1 SSD SILVER STABILIZER DECAL 1

(Included With 7014) (Included With 9014)

B10KS BLACK BOOT 1 HB-7014 HARDWARE BAG: 7014 / 9014 1

(Included With 9014) I-7014 INST SHEET: 7014 / 9014 1

BTIE RED BOOT TIE 1

(Included With 7014)

Installation:

1. Park the vehicle on a level concrete or asphalt surface with the front tires / wheels pointing

straight forward.

2. Set the emergency brake & block the rear tires / wheels.

PAGE 1
2014 Ram 2500 4WD 2013 - 2014 Ram 3500 4WD Heavy Duty OEM Steering Stabilizer Installation Instructions www.skyjacker.com Required Tool List: • Safety Glasses • Metric / Standard Wrenches & Sockets • Torque Wrench Before beginning the installation, thoroughly & completely read these instructions. Please refer to the Parts List to insure that all parts & hardware are received prior to the disassembly of the vehicle.
PAGE 2
3. Remove the OEM steering stabilizer from the OEM center link bracket & front axle bracket. 4. Insert the supplied longer polyurethane bushing (1.5" Long) & the longer sleeve (1.5" Long) into the shaft end of the new Skyjacker steering stabilizer. 5. Insert the supplied shorter polyurethane bushing (1.25" Long) & the shorter sleeve (1.38" Long) into the body end of the new Skyjacker steering stabilizer. Photo # 1 6.