Owner's manual

1970 - 1979 Ford

F-150 / Bronco

Heavy Duty OEM

Steering Stabilizer

Installation Instructions

I-7030 REV2 12-13

www.skyjacker.com

Pg 1

REQUIRED TOOL LIST:

• Safety Glasses

• Metric / Standard Wrenches & Sockets

• Torque Wrench

Before beginning the installation, thoroughly & completely read these instructions & the enclosed

driver’s WARNING NOTICE. Affix the WARNING decal in the passenger compartment in clear view

of all occupants. Please refer to the Parts List to insure that all parts & hardware are received prior

to the disassembly of the vehicle. If any parts are found to be missing, contact SKYJACKER

Customer Service at 318-388-0816 to obtain the needed items. If you have any questions or

reservations about the installation of this product, contact SKYJACKER

Technical Assistance at

318-388-0816.

Component Box Breakdown:

Part #: 7030 / 9030

Item # Description Qty Item # Description Qty

7800WS WHITE STEERING DAMPER 1 BTIE-K BLACK BOOT TIE 1

(Included With 7030) (Included With 9030)

9800WS SILVER STEERING DAMPER 1 HSS HYDRO SHOCK DECAL 1

(Included With 9030) (Included With 7030)

B10RS RED BOOT 1 SSD SILVER STABILIZER DECAL 1

(Included With 7030) (Included With 9030)

B10KS BLACK BOOT 1 HB-USS HARDWARE BAG: 7030 / 9030 1

(Included With 9030) I-7030 INST SHEET: 7030 / 9030 1

BTIE RED BOOT TIE 1

(Included With 7030)

Hardware Bag Breakdown:

Part # HB-USS

Item # Description Qty Item # Description Qty

STEMBUSH-SST STEM BUSHING 4 142120 STAB WASH PKG 2

PAGE 1
970 - 1979 Ford F-150 / Bronco Heavy Duty OEM Steering Stabilizer Installation Instructions www.skyjacker.com Required Tool List: • Safety Glasses • Metric / Standard Wrenches & Sockets • Torque Wrench Before beginning the installation, thoroughly & completely read these instructions & the enclosed driver’s WARNING NOTICE. Affix the WARNING decal in the passenger compartment in clear view of all occupants.
PAGE 2
Installation: 1. Park the vehicle on a level concrete or asphalt surface with the front tires / wheels pointing straight forward. 2. Set the emergency brake & block the rear tires / wheels. Photo # 1 3. Remove the OEM steering stabilizer from the vehicle. 4. Install a supplied washer & poly bushing on each stud base of the new Skyjacker steering stabilizer. (See Photo # 1) 5.