User Manual

2001 - 2010 GM 2500 HD 4WD

2002- 2010 GM Hummer H2

Heavy Duty OEM

Steering Stabilizer

Installation Instructions

I-7098 REV2 12-13

www.skyjacker.com

Pg 1

Before beginning the installation, thoroughly & completely read these instructions. Please refer to

the Parts List to insure that all parts & hardware are received prior to the disassembly of the vehicle.

If any parts are found to be missing, contact SKYJACKER

Customer Service at 318-388-0816 to

obtain the needed items. If you have any questions or reservations about installing this product,

contact SKYJACKER

Technical Assistance at 318-388-0816.

REQUIRED TOOL LIST:

• Safety Glasses

• Metric / Standard Wrenches & Sockets

• Torque Wrench

Hardware Bag Breakdown:

Part # HB-7098

Item # Description Qty Item # Description Qty

HOURGLASS 5/8 HOURGLASS 5/8 BUSHING 1 P837 STAB TAPERED STUD 1

HG58125 HOURGLASS 5/8" X 1.25" 1 403712 ES22 SLEEVE / 1.25" LONG 1

Component Box Breakdown:

Part #: 7098 / 9098

Item # Description Qty Item # Description Qty

7202WS WHITE STEERING DAMPER 1 BTIE-K BLACK BOOT TIE 1

(Included With 7098) (Included With 9098)

9202WS SILVER STEERING DAMPER 1 HSS HYDRO SHOCK DECAL 1

(Included With 9098) (Included With 7098)

B12RS RED BOOT 1 SSD SILVER STABILIZER DECAL 1

(Included With 7098) (Included With 9098)

B12KS BLACK BOOT 1 HB-7098 HARDWARE BAG: 7098 / 9098 1

(Included With 9098) I-7098 INST SHEET: 7098 / 9098 1

BTIE RED BOOT TIE 1

(Included With 7098)

PAGE 1
2001 - 2010 GM 2500 HD 4WD 2002- 2010 GM Hummer H2 Heavy Duty OEM Steering Stabilizer Installation Instructions www.skyjacker.com Required Tool List: • Safety Glasses • Metric / Standard Wrenches & Sockets • Torque Wrench Before beginning the installation, thoroughly & completely read these instructions. Please refer to the Parts List to insure that all parts & hardware are received prior to the disassembly of the vehicle.
PAGE 2
Installation: 1. Park the vehicle on a level concrete or asphalt surface with the front tires / wheels pointing straight forward. 2. Set the emergency brake & block the rear tires / wheels. 3. Remove the OEM steering stabilizer from the frame & from the center steering link. 4. Install the supplied 1 1/4” long bushing into the body end of the new Skyjacker steering stabilizer & install the supplied 1 1/4” long sleeve into the new bushing. (See Photo # 1) Photo # 1 5.