Manual

ManualsBrandsSkyjacker ManualsCar9150

Ford Ranger / BroncoII /

Explorer

Single Steering Stabilizer

Part # 7150 / 9150

I-7150 REV2 2-14

Pg 1

www.skyjacker.com

REQUIRED TOOL LIST:

• Safety Glasses

• Metric / Standard Wrenches & Sockets

• Measuring Tape

• Torque Wrench

Before beginning the installation, thoroughly & completely read these instructions & the enclosed

driver’s WARNING NOTICE. Affix the WARNING decal in the passenger compartment in clear view

of all occupants. Please refer to the Parts List to insure that all parts & hardware are received prior

to the disassembly of the vehicle. If any parts are found to be missing, contact SKYJACKER

Customer Service at 318-388-0816 to obtain the needed items. If you have any questions or

reservations about the installation of this product, contact SKYJACKER

Technical Assistance at

318-388-0816.

Component Box Breakdown:

Part #: 7150 / 9150

Item # Description Qty Item # Description Qty

7900WS WHITE STEERING DAMPER 1 BTIE RED BOOT TIE 1

(Included With 7150) (Included With 7150)

9900WS SILVER STEERING DAMPER 1 BTIE-K BLACK BOOT TIE 1

(Included With 9150) (Included With 9150)

83031 MAIN BRACKET 1 HSS HYDRO SHOCK DECAL 1

83032 BACKING PLATE 1 (Included With 7150)

B10RS RED BOOT 1 SSD SILVER STABILIZER DECAL 1

(Included With 7150) (Included With 9150)

B10KS BLACK BOOT 1 HB-7150 HARDWARE BAG: 7150 / 9150 1

(Included With 9150) I-7150 INST SHEET: 7150 / 9150 1

Hardware Bag Breakdown:

Part # HB-7150

Item # Description Qty Item # Description Qty

83037 TIE ROD BRACKET 1 38FTN 3/8 FINE THREAD LOCK NUT 2

516X1X134U 5/16 X 1 X 1 3/4 U-BOLT RD 2 38SAEW 3/8 SAE WASHER 2

516CTN 5/16 COARSE THREAD LOCK NUT 4 STEM BUSH-SST STEM BUSHING 4

516SAEW 5/16 SAE WASHER 4 142120 STAB WASH PKG 2

38X112FTB 3/8 X 1 1/2 FINE THREAD BOLT 2

Summary of content (4 pages)

PAGE 1
Ford Ranger / BroncoII / Explorer Single Steering Stabilizer Part # 7150 / 9150 www.skyjacker.com Required Tool List: • • • • Safety Glasses Metric / Standard Wrenches & Sockets Measuring Tape Torque Wrench Before beginning the installation, thoroughly & completely read these instructions & the enclosed driver’s WARNING NOTICE. Affix the WARNING decal in the passenger compartment in clear view of all occupants.
PAGE 2
Installation: 1. Park the vehicle on a level concrete or asphalt surface with the front tires / wheels pointing straight forward. 2. Set the emergency brake & block the rear tires / wheels. 3. Install the new Skyjacker bracket “A” (long bracket) against the slotted holes on the outside of the frame & install the new Skyjacker backing plate bracket on the inside of the frame using the supplied 3/8" x 1 1/2" bolts, washers, & nuts.
PAGE 3
Final Notes: • After the installation is complete, double check that all nuts & bolts are tight. Refer to the following chart for the proper torque specifications. (Do not retighten the nuts & bolts where thread lock compound was used.) • Cycle the steering of the vehicle left to right & check all parts for adequate clearance. • After the first 100 miles, check all of the hardware for the proper torque & periodically thereafter.
PAGE 4
Jesus Forgives, Rocks don’t www.skyjacker.com Jesus Christ Died For You. Jesús murió por ti. For God so loved the world that He gave His only Son, so that everyone who believes in Him should not perish, but have everlasting life. Romans 3:23 “Porque tanto amó Dios al mundo, que dio a su Hijo unigénito, para que todo el que cree en él no se pierda, sino que tenga vida eterna.” Romanos 3:23 For all have sinned; all fall short of God’s glorious standard.