Manual

ManualsBrandsSkyjacker ManualsCar9196

1999 - 2006 GM K1500

Single Steering Stabilizer

Part # 7196 / 9196

I-7196 REV3 2-14 Pg 1

www.skyjacker.com

REQUIRED TOOL LIST:

• Safety Glasses

• Metric / Standard Wrenches & Sockets

• Drill / 5/16" Drill Bit

• Measuring Tape

• Torque Wrench

Before beginning the installation, thoroughly & completely read these instructions & the enclosed

driver’s WARNING NOTICE. Affix the WARNING decal in the passenger compartment in clear view

of all occupants. Please refer to the Parts List to insure that all parts & hardware are received prior

to the disassembly of the vehicle. If any parts are found to be missing, contact SKYJACKER

Customer Service at 318-388-0816 to obtain the needed items. If you have any questions or

reservations about the installation of this product, contact SKYJACKER

Technical Assistance at

318-388-0816.

Component Box Breakdown:

Part #: 7196 / 9196

Item # Description Qty Item # Description Qty

7500WS WHITE STEERING DAMPER 1 BTIE-K BLACK BOOT TIE 1

(Included With 7196) (Included With 9196)

9500WS SILVER STEERING DAMPER 1 HSS HYDRO SHOCK DECAL 1

(Included With 9196) (Included With 7196)

B12RS RED BOOT 1 SSD SILVER STABILIZER DECAL 1

(Included With 7196) (Included With 9196)

B12KS BLACK BOOT 1 HB-7196 HARDWARE BAG: 7196 / 9196 1

(Included With 9196) I-7196 INST SHEET: 7196 / 9196 1

BTIE RED BOOT TIE 1

(Included With 7196)

Hardware Bag Breakdown:

Part # HB-7196

Item # Description Qty Item # Description Qty

83037 TIE ROD BRACKET 1 516SAEW 5/16 SAE WASHER 4

C966DSST-S STAB TAB BRACKET 1 38X1TCFB 3/8 X 1 THRD-CUT FLG BOLT 1

140629 EB6 STUD BAG 1 142120 STAB WASH PKG 1

516X114X134U 5/16 X 1 1/4 X 1 3/4 U-BOLT RD 2 HOURGLASS 5/8 5/8 SHOCK BUSHING 1

516CTN 5/16 COARSE THREAD LOCK NUT 4 STEM BUSH-SST STEM BUSHING 2

Summary of content (4 pages)

PAGE 1
999 - 2006 GM K1500 Single Steering Stabilizer Part # 7196 / 9196 www.skyjacker.com Required Tool List: • • • • • Safety Glasses Metric / Standard Wrenches & Sockets Drill / 5/16" Drill Bit Measuring Tape Torque Wrench Before beginning the installation, thoroughly & completely read these instructions & the enclosed driver’s WARNING NOTICE. Affix the WARNING decal in the passenger compartment in clear view of all occupants.
PAGE 2
Installation: 1. Park the vehicle on a level concrete or asphalt surface with the front tires / wheels pointing straight forward. 2. Set the emergency brake & block the rear tires / wheels. 3. While supporting the front cross member with a floor jack, remove the front lower A-arm bolt at the frame. (If installing on a vehicle with 4” Photo # 1 or more lift, it will be the upper front bolt on the after market cross member. Remove the bolt using a 15/16" socket. (See Photo # 1) 4.
PAGE 3
Final Notes: • After the installation is complete, double check that all nuts & bolts are tight. Refer to the following chart for the proper torque specifications. (Do not retighten the nuts & bolts where thread lock compound was used.) • Cycle the steering of the vehicle left to right & check all parts for adequate clearance. • After the first 100 miles, check all of the hardware for the proper torque & periodically thereafter.
PAGE 4
Jesus Forgives, Rocks don’t www.skyjacker.com Jesus Christ Died For You. Jesús murió por ti. For God so loved the world that He gave His only Son, so that everyone who believes in Him should not perish, but have everlasting life. Romans 3:23 “Porque tanto amó Dios al mundo, que dio a su Hijo unigénito, para que todo el que cree en él no se pierda, sino que tenga vida eterna.” Romanos 3:23 For all have sinned; all fall short of God’s glorious standard.