Manual

ManualsBrandsSkyjacker ManualsCar9200

76-86 Jeep CJ

87-95 Jeep Wrangler YJ

Dual Steering Stabilizer

Part # 7200 / 9200

I-7200 REV2 2-14

www.skyjacker.com

Pg 1

REQUIRED TOOL LIST:

• Safety Glasses

• Metric / Standard Wrenches & Sockets

• Measuring Tape

• Torque Wrench

Before beginning the installation, thoroughly & completely read these instructions & the enclosed

driver’s WARNING NOTICE. Affix the WARNING decal in the passenger compartment in clear view

of all occupants. Please refer to the Parts List to insure that all parts & hardware are received prior

to the disassembly of the vehicle. If any parts are found to be missing, contact SKYJACKER

Customer Service at 318-388-0816 to obtain the needed items. If you have any questions or

reservations about the installation of this product, contact SKYJACKER

Technical Assistance at

318-388-0816.

Component Box Breakdown:

Part #: 7200 / 9200

Item # Description Qty Item # Description Qty

7900WS WHITE STEERING DAMPER 2 BTIE RED BOOT TIE 2

(Included With 7200) (Included With 7200)

9900WS SILVER STEERING DAMPER 2 BTIE-K BLACK BOOT TIE 2

(Included With 9200) (Included With 9200)

83540 MAIN BRACKET 1 HSS HYDRO SHOCK DECAL 2

83541 TIE ROD BRACKET 1 (Included With 7200)

B10RS RED BOOT 2 SSD SILVER STABILIZER DECAL 2

(Included With 7200) (Included With 9200)

B10KS BLACK BOOT 2 HB-7200 HARDWARE BAG: 7200 / 9200 1

(Included With 9200) I-7200 INST SHEET: 7200 / 9200 1

Hardware Bag Breakdown:

Part # HB-7200

Item # Description Qty Item # Description Qty

38X418X4U 3/8 X 4 1/8 X 4 U-BOLT SQ 1 516CTN 5/16 COARSE THREAD LOCK NUT 4

516X1X134U 5/16 X 1 X 1 3/4 U-BOLT RD 2 516SAEW 5/16 SAE WASHER 4

38CTN 3/8 COARSE THREAD LOCK NUT 2 STEM BUSH-SST STEM BUSHING 8

38SAEW 3/8 SAE WASHER 2 142120 STAB WASH PKG 4

Summary of content (4 pages)

PAGE 1
76-86 Jeep CJ 87-95 Jeep Wrangler YJ Dual Steering Stabilizer Part # 7200 / 9200 www.skyjacker.com Required Tool List: • • • • Safety Glasses Metric / Standard Wrenches & Sockets Measuring Tape Torque Wrench Before beginning the installation, thoroughly & completely read these instructions & the enclosed driver’s WARNING NOTICE. Affix the WARNING decal in the passenger compartment in clear view of all occupants.
PAGE 2
Installation: 1. Park the vehicle on a level concrete or asphalt surface with the front tires / wheels pointing straight forward. 2. Set the emergency brake & block the rear tires / wheels. 3. Install the new Skyjacker main bracket on the outside of the passenger frame rail on CJ models or on the inside of the frame rail on YJ models using the supplied u-bolt, washers, & nuts. (See Photo # 1) Note: Do not tighten at this time. 4.
PAGE 3
Retaining Nut Retaining Washer Stem Bushings Bracket Retaining Washer Shock Stud Photo # 2 Final Notes: • After the installation is complete, double check that all nuts & bolts are tight. Refer to the following chart for the proper torque specifications. (Do not retighten the nuts & bolts where thread lock compound was used.) • Cycle the steering of the vehicle left to right & check all parts for adequate clearance.
PAGE 4
Jesus Forgives, Rocks Don’t www.skyjacker.com Jesus Christ Died For You. Jesús murió por ti. For God so loved the world that He gave His only Son, so that everyone who believes in Him should not perish, but have everlasting life. Romans 3:23 “Porque tanto amó Dios al mundo, que dio a su Hijo unigénito, para que todo el que cree en él no se pierda, sino que tenga vida eterna.” Romanos 3:23 For all have sinned; all fall short of God’s glorious standard.