User guide

ManualsBrandsSkyjacker ManualsCar9240

Ford

Dual Steering Stabilizer

Part # 7240 / 9240

I-7240 REV2 2-14 Pg 1

www.skyjacker.com

REQUIRED TOOL LIST:

• Safety Glasses

• Metric / Standard Wrenches & Sockets

• Measuring Tape

• Torque Wrench

Before beginning the installation, thoroughly & completely read these instructions & the enclosed

driver’s WARNING NOTICE. Affix the WARNING decal in the passenger compartment in clear view

of all occupants. Please refer to the Parts List to insure that all parts & hardware are received prior

to the disassembly of the vehicle. If any parts are found to be missing, contact SKYJACKER

Customer Service at 318-388-0816 to obtain the needed items. If you have any questions or

reservations about the installation of this product, contact SKYJACKER

Technical Assistance at

318-388-0816.

Component Box Breakdown:

Part #: 7240 / 9240

Item # Description Qty Item # Description Qty

7800WS WHITE STEERING DAMPER 2 BTIE RED BOOT TIE 2

(Included With 7240) (Included With 7240)

9800WS SILVER STEERING DAMPER 2 BTIE-K BLACK BOOT TIE 2

(Included With 9240) (Included With 9240)

83540 MAIN BRACKET 1 HSS HYDRO SHOCK DECAL 2

83541 TIE ROD BRACKET 1 (Included With 7240)

B10RS RED BOOT 2 SSD SILVER STABILIZER DECAL 2

(Included With 7240) (Included With 9240)

B10KS BLACK BOOT 2 HB-7240 HARDWARE BAG: 7240 / 9240 1

(Included With 9240) I-7240 INST SHEET: 7240 / 9240 1

Hardware Bag Breakdown:

Part # HB-7240

Item # Description Qty Item # Description Qty

38X614X4U 3/8 X 6 1/4 X 4 U-BOLT SQ 1 38SAEW 3/8 SAE WASHER 2

516X114X134U 5/16 X 1 1/4 X 1 3/4 U-BOLT RD 2 516SAEW 5/16 SAE WASHER 4

38CTN 3/8 COARSE THRD LOCK NUT 2 STEM BUSH-SST STEM BUSHING 8

516CTN 5/16 COARSE THR LOCK NUT 4 142120 STAB WASH PKG 4

Summary of content (4 pages)

PAGE 1
Ford Dual Steering Stabilizer Part # 7240 / 9240 www.skyjacker.com Required Tool List: • • • • Safety Glasses Metric / Standard Wrenches & Sockets Measuring Tape Torque Wrench Before beginning the installation, thoroughly & completely read these instructions & the enclosed driver’s WARNING NOTICE. Affix the WARNING decal in the passenger compartment in clear view of all occupants. Please refer to the Parts List to insure that all parts & hardware are received prior to the disassembly of the vehicle.
PAGE 2
Installation: 1. Park the vehicle on a level concrete or asphalt surface with the front tires / wheels pointing straight forward. 2. Set the emergency brake & block the rear tires / wheels. 3. Install the new Skyjacker bracket "A" to the inside of the frame on the passenger side above the OEM tie rod assembly & mount using the supplied square u-bolt, washers, & nuts. Twist the bottom of the new bracket forward & tighten.
PAGE 3
Retaining Nut Retaining Washer Stem Bushings Bracket Retaining Washer Shock Stud Photo # 2 Final Notes: • After the installation is complete, double check that all nuts & bolts are tight. Refer to the following chart for the proper torque specifications. (Do not retighten the nuts & bolts where thread lock compound was used.) • Cycle the steering of the vehicle left to right & check all parts for adequate clearance.
PAGE 4
Jesus Forgives, Rocks Don’t www.skyjacker.com Jesus Christ Died For You. Jesús murió por ti. For God so loved the world that He gave His only Son, so that everyone who believes in Him should not perish, but have everlasting life. Romans 3:23 “Porque tanto amó Dios al mundo, que dio a su Hijo unigénito, para que todo el que cree en él no se pierda, sino que tenga vida eterna.” Romanos 3:23 For all have sinned; all fall short of God’s glorious standard.