Owners manual

ManualsBrandsSkyjacker ManualsCar9297

97-02 Ford F-150

Dual Steering Stabilizer

Part # 7297

Part # Description Qty.

7500 WHITE STEERING DAMPER 2

7297-MB F150 STABILIZER BRKT, MAIN 1

7297-FB F150 STABILIZER BRKT, FRAME 1

B12RS RED BOOT, SMALL/FOR 7500WS 2

BTIE RED BOOT TIE 2

HSS HYDRO SHOCK DECAL 2

I-7297 INST. SHEET FOR 7297 1

58X612FTB 5/8 X 6 1/2 FINE THD/ GR 8 1

12X5FTB 1/2 X 5 FINE THREAD BOLT/G8 1

38X1FTB 3/8 X 1 FINE THREAD BOLT 1

516X114X134U 5/16 X 1 1/4 X 1 3/4 U-BT R 2

141509 ES25 SLEEVE/403646 1.50" 2

Part # Description Qty.

58SP 5/8" SPACER - 1 1/4" O.D. 1

58FTN 5/8-18 NYLON INSERT LOCKNUT 1

12FTN 1/2-20 FINE N/I LOCK NUT 1

38FTN 3/8-24 FINE N/I LOCK NUT 1

516CTN 516-18 COARSE N/I LOCK NUT 4

58SAEW 5/8 SAE WASHERS 2

12SAEW 1/2 SAE WASHER 2

38SAEW 3/8 SAE WASHER 2

516SAEW 5/16 SAE WASHER 8

STEM BUSH-SST STEM BUSHING-STEERING STAB. 4

HOURGLASS 5/8 HOURGLASS 5/8 SHOCK BUSHING 2

142120 STAB WASH PKG - P889/145098 2

(Park the vehicle on level ground with the tires pointing straight forward).

1. While supporting the front cross member with floor jack, remove the

(Passenger Side) front lower A-Arm bolt at the frame. (If installing

on a vehicle with 4” of more lift, it will be the upper front bolt on the

after market cross member. Remove this bolt.

2. Attach the main bracket at this location using the 5/8 x 6 1/2” fine

thread bolts, washers, and nut.

3. While holding the bracket level, drill through the inside hole on the

bracket using a 13/32” drill bit and install the 3/8 x 1 fine thread bolt,

washers, and nut. (See Photo #1).

4. Mount the center link bracket approximately 10” from the center of

the idler arm retaining nut. Attach using 5/16 x 1 1/4 x 1 3/4” U-

Bolts, with 5/16 washers and nuts. (See Photo #2).

5. Attach both cylinders to the main bracket using the 1/2 x 5 fine

thread bolt, washers, and nut. Be sure to install the 5/8” aluminum

spacer between the cylinder eyes. (See Photo #3).

6. Attach both cylinders to center link bracket as shown in (Photo #4).

Then adjust the center link bracket so that stabilizers are at center

of travel with the tires pointed straight forward.

7. Once steering stabilizer is installed, check all brackets and bolts for

proper installation. Cycle steering left to right and check all parts for

adequate clearance. Retighten all hardware after the first 100 miles.

Photo #1

Photo #2

Photo #3

Photo #4 Photo #5

I-7297 1-03

5/8” Spacer

Summary of content (2 pages)

PAGE 1
97-02 Ford F-150 Dual Steering Stabilizer Part # 7297 Part # Description 7500 7297-MB 7297-FB B12RS BTIE HSS I-7297 58X612FTB 12X5FTB 38X1FTB 516X114X134U 141509 WHITE STEERING DAMPER F150 STABILIZER BRKT, MAIN F150 STABILIZER BRKT, FRAME RED BOOT, SMALL/FOR 7500WS RED BOOT TIE HYDRO SHOCK DECAL INST. SHEET FOR 7297 5/8 X 6 1/2 FINE THD/ GR 8 1/2 X 5 FINE THREAD BOLT/G8 3/8 X 1 FINE THREAD BOLT 5/16 X 1 1/4 X 1 3/4 U-BT R ES25 SLEEVE/403646 1.50" Qty.
PAGE 2
Jesus Forgives, Rocks Don’t www.skyjacker.com Jesus Christ Died For You. Jesús murió por ti. John 3:16 Juan 3:16 For God so loved the world that He gave His only Son, so that everyone who believes in Him should not perish, but have everlasting life. Romans 3:23 “Porque tanto amó Dios al mundo, que dio a su Hijo unigénito, para que todo el que cree en él no se pierda, sino que tenga vida eterna.” Romanos 3:23 For all have sinned; all fall short of God’s glorious standard.