Owner's manual

I-FAA301 Pg 2
Part # HB-P12BE
Item # Description Qty Item # Description Qty
516X1FTB 5/16 X 1 FINE THRD BOLT 7 716X312FTB 7/16 X 3 1/2 FINE THD,GR 8 2
516FTN 5/16" FINE THRD N/I LOCKNUT 7 716FTN 7/16-20 FINE N/I LOCK NUT 8
516SAEW 5/16 SAE WASHER 14 716SAEW 7/16 SAE WASHER 16
716X114FTB 7/16 X 1 1/4 FN THR BLT GR8 6
Part # HB-P12SS
Item # Description Qty Item # Description Qty
BTIE-K BLACK BOOT TIE 2 SS438 STEERING STOP,10-12 POL RGR 2
Part # HB-P12USM
Item # Description Qty Item # Description Qty
CS1281 CRUSH SLEEVE / 1.281 6 38SAEW 3/8 SAE WASHER 8
10MMX100MMB 10 X 100 METRIC BOLT/ 10.9 4 516X34TCFB 5/16 X 3/4 THD CUT FLG BOLT 4
10MMN 10 MM N/I LOCKNUT 4
Installation:
1. With the vehicle on flat level ground, set the emergency brake,
& block the rear tires / wheels.
2. Raise the front of the vehicle & support the vehicle with jack stands.
3. Remove the front tires / wheels using a 17mm socket. (See Photo # 1)
4. Remove the front bumper assembly using a 15mm socket for the two
upper mounting bolts & a 13mm socket for the three lower mounting
bolts.
5. Disconnect the front brake caliper assemblies using a 15mm socket.
(See Photo # 2)
6. Disconnect the front brake lines from the plastic retaining brackets on
the front upper A-arms. (See Photo # 3)
Photo # 1
Photo # 2
Photo # 3