User guide

2007- 2014 Toyota Tundra
1"- 3” Performance Strut
Installation Instructions
www.skyjacker.com
I-TU730ST REV3 6-14 Pg 1
REQUIRED TOOL LIST:
Before beginning the installation, thoroughly & completely read these instructions & the enclosed 
driver’s WARNING NOTICE. Affix the WARNING decal in the passenger compartment in clear view 
of all occupants. Please refer to the Parts List to insure that all parts & hardware are received prior 
to the disassembly of the vehicle. If any parts are found to be missing, contact SKYJACKER
® 
Customer Service at 318-388-0816 to obtain the needed items. If you have any questions or 
reservations about installing this product, contact SKYJACKER
®
 Technical Assistance at 318-388-
0816. 
Park the vehicle on a level concrete or asphalt surface. Many times a vehicle is not level (side-to-
side) from the factory & is usually not noticed until a lift kit has been installed, which makes the 
difference more visible. Using a measuring tape, measure the front & rear (both sides) from the 
ground up to the center of the fender opening above the axle. Record this information below for 
future reference.
Driver Side Front:          Passenger Side Front: 
Driver Side Rear:          Passenger Side Rear:
• If larger tires (10% more than the OEM diameter) are installed, speedometer recalibration will be   
necessary.  Contact  your  local  Toyota  dealer  or  an  authorized  dealer  for  details. 
• After installation, a qualified alignment facility is required to align the vehicle to the OEM 
 specifications.   






