Bluetooth Module Module SKB369 Skylab M&C Technology Co., Ltd SKB369 Bluetooth Module Name: Bluetooth Module Model No.: SKB369 Revision: V1.06 Revision History Revision Description Approved Date V1.01 Initial Release Hogan 20170103 V1.02 Revise The Product Picture Hogan 20170414 V1.03 Revise Operating Temperature Hogan 20170421 V1.04 Add Ordering Information Revise The Product Picture Abner 20170801 V1.05 Revise PIN 23 function George 20170821 V1.
Bluetooth Module Module SKB369 Skylab M&C Technology Co., Ltd Contents 1. General Description ...................................................................................................................................................................................... 4 2. Applications ..................................................................................................................................................................................................... 4 3. Features ...
Bluetooth Module Skylab M&C Technology Co., Ltd Module SKB369 10.3 Current .............................................................................................................................................................................................. 14 11. Manufacturing Process Recommendations ..................................................................................................................................... 15 12. Packaging Specification .................................
Bluetooth Module Skylab M&C Technology Co., Ltd Module SKB369 1. General Description The SKB369 is a highly integrated Bluetooth 4.2 BLE module, designed for high data rate, short-range wireless communication in the 2.4GHz ISM band. Also, SKB369 support ANT Protocol. The module is based on Nordic nRF52832 radio Transceiver IC, has a 32 bit ARM Cortex-M4F CPU, Flash memory and analog and digital peripherals.
Bluetooth Module Module SKB369 Skylab M&C Technology Co., Ltd 4.
Bluetooth Module Skylab M&C Technology Co., Ltd Module SKB369 5. Interfaces 5.1 Power Supply Regulated power for the SKB369 is required. The input voltage Vcc range should be 1.7V to 3.6V. Suitable decoupling must be provided by external decoupling circuitry (10uF and 0.1uF). It can reduce the noise from power supply and increase power stability. 5.2 System Function Interfaces 5.2.
Bluetooth Module Module SKB369 Skylab M&C Technology Co., Ltd Instance Master/Slave TWI0 Master TWI1 Master Table5-1: TWI Pin Share Scheme Note：I2C:Inter－Integrated Circuit 5.2.3 Flash Program I/Os The module has two programmer pins, respectively SWDCLK pin and SWDIO pin. The two pin Serial Wire Debug (SWD) interface provided as a part of the Debug Access Port (DAP) offers a flexible and powerful mechanism for non-intrusive debugging of program code.
Bluetooth Module Module SKB369 Skylab M&C Technology Co., Ltd 5.2.5 UARTs The Universal Asynchronous Receiver/Transmitter offers fast, full-duplex, asynchronous serial communication with built-in flow control (CTS, RTS), support in hardware up to 1 Mbps baud. Parity checking is supported. Support the following baudrate in bps unit: 1200/2400/4800/9600/14400/19200/28800/38400/57600/76800/115200.
Bluetooth Module Module SKB369 Skylab M&C Technology Co., Ltd be used as an analog wakeup source from System OFF or System ON. The comparator threshold can be programmed to a range of fractions of the supply voltage. 5.2.8 Reset The reset pin of the SKB369 module is in the internal pull-high state , when the reset pin of the module is input to a low level , the module will be automatically reset .After the reset pin is used , the parameters of the current setting will not be ANT . 5.2.
Bluetooth Module Skylab M&C Technology Co., Ltd Module SKB369 6. Module Specifications Hardware Features Model SKB369 ANTenna Type PCB ANTenna Chipset Solution nRF52832 Voltage 1.7V~3.6V Dimension(L×W×H) 17.4×13.7×1.9 mm Wireless Features Wireless Standards Bluetooth ® 4.2,ANT Frequency Range 2400MHz---2483.5MHz Data Rates 1Mbps(Bluetooth ® 4.2) Modulation Technique GFSK Modulation(Bluetooth ® 4.
Bluetooth Module Module SKB369 Skylab M&C Technology Co., Ltd 7. Module Pinout and Pin Description 7.
Bluetooth Module Module SKB369 Skylab M&C Technology Co., Ltd 7.2 Pin Description Pin No. Pin Name Description Remark 1 GND Ground 2 VCC Main Power Supply 1.7V to 3.6V 3 P0.25 General Purpose I/O Digital I/O 4 P0.26 General Purpose I/O Digital I/O 5 P0.27 General Purpose I/O Digital I/O 6 P0.28 Digital I/O; Analog input ADC/LPCOMP input 4 7 P0.29 Digital I/O; Analog input ADC/LPCOMP input 5 8 P0.30 Digital I/O; Analog input ADC/LPCOMP input 6 9 P0.
Bluetooth Module Skylab M&C Technology Co., Ltd Module SKB369 8. PCB Design Guide Please reserve empty area for PCB ANTenna when you are going to design a device`s board, the empty range minimum size : 16.5*6.6mm , please kindly check the “PCB footprint and Dimensions” for reference. 9.
Bluetooth Module Module SKB369 Skylab M&C Technology Co., Ltd 10. Electrical Characteristics 10.1 Absolute Maximum Ratings Parameter Condition Min. Storage Temperature Range Typ. Max. Unit -40 125 °C ESD Protection VESD / 4000 V Supply Voltage VCC -0.3 3.9 V 3.63 V Voltage On Any I/O Pin -0.3 Table10-1: Absolute Maximum Ratings 10.2 Recommended Operation Ratings Parameter Symbol Min. Typ. Max. Unit Extended Temp. Range TA -40 25 85 ºC Power Supply VCC 1.7 3.3 3.
Bluetooth Module Skylab M&C Technology Co., Ltd Module SKB369 11. Manufacturing Process Recommendations Figure 6: SKB369 Typical Lead-free Soldering Profile Note：The final re-flow soldering temperature map chosen at the factory depends on additional external factors, for example, choice of soldering paste,size, thickness and properties of the module`s baseboard etc. Exceeding the maximum soldering temperature in the recommended soldering profile may permanently damage the module.
Bluetooth Module Module SKB369 Skylab M&C Technology Co., Ltd 12. Packaging Specification SKB369 modules are put into tray and 528 units per tray. Each tray is ‘dry’ and vacuum packaging. Figure 7: SKB369 Packaging 13. Ordering Information 16 / 17 Module No. Crystal Shielding ANTenna Temperature Grade SKB369-CSPI 32.
Bluetooth Module Skylab M&C Technology Co.
Bluetooth Module Module SKB369 Skylab M&C Technology Co., Ltd FCC Radiation Exposure Statement The modular can be installed or integrated in mobile or fix devices only. This modular be installed in any portable device, for example, USB dongle like transmitters is forbidden. This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be collocated or operating in conjunction with antenna or transmitter.
