® www.skylinkhome.com AAA+ Control Panel MODEL: AM-002 / ML-001 TM CUSTOMER SERVICE P/N. 101A379 OCT, 2005 17 Sheard Avenue, Brampton, Ontario, Canada L6Y 1J3 Tel : (905) 456-8883 PATENTED Fax : (905) 456-7819 ©2005 SKYLINK GROUP Email : support@skylinkhome.
English AAA+ Control Panel USER'S INSTRUCTIONS
Declaration of Conformity IMPORTANT SAFETY INSTRUCTIONS Application of Council Directive(s) : Radio Equipment and Telecommunication Terminal Equipment Directive (1999/5/EC) - R&TTE Standard(s) to which Conformity is Declared: EMC: EN 55022:1998+A1: 2000, EN 610000-3-2: 2000, EN 61000-3.3: 1995 +A1:2001, EN 55024: 1998+A1: 2001, EN 50130-4: 1995/A1: 1998, EN 300220-3: 2000, EN 301489-3: 2002 Safety: EN 60950-1: 2001, EN 50371: 2002 Telephony: TBR 21: 1998 1.
IC Statement ‘’This product meets the applicable Industry Canada technical specifications.” Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. In some cases, the company’s inside wiring associated with a single line individual service may be extended by means of a certified connector assembly (telephone extension cord).
FCC Information Consumer Information: a) This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company. b) An applicable certification jacks Universal Service Order Codes (USOC) for the equipment is provided (i.e.
SYSTEM CONFIGURATION INTRODUCTION Overview Congratulations on your purchase of a Skylink Home Smart Center. This is a security control panel which not only functions as a security system, but also monitors your premises by giving you alert notification when the system is not armed. It is also a home automation center, which allows you to remotely control household appliances and lights, even when you are away from home.
ACCESSORIES Control Module SW-100 (US and Canada) - To turn home appliances / lights on / off - Max rating: 960W (Resistive) INTRODUCTION • One telephone cord • Rechargeable battery of the Control Panel: North American version Control Module SW-101U (UK), SW-101F (French), SW-101G (German) (3 models for 3 countries) European Version Emergency Dialer (AD-433S) 905-608-9223 ® AD-433 - External dialer with user programmable voice message - Calls up to 9 phone numbers - One personal voice recording up
ACCESSORIES INTRODUCTION 7 8 Audio Sensor (AS-101) 11 ] - When audio level exceeds preset limit, it will trigger the alarm - Place beside smoke detector, CO detector, so when these detectors are triggered, the control panel will be triggered 1 2 Remote Control (4B-101) - Additional keychain remotes for other family members - To arm, disarm or trigger the panic alarm with this remote 10 9 3 4 5 6 Keypad Control (KP-434) 17 18 - External keypad control - To arm, disarm or trigger the the panic
ACCESSORIES Additional sensors and transmitters as well as add on accessories are available to work with your system. Door/Window Sensor (WD-101) - Magnetic Contact Sensor - For all doors or windows - Batteries included INSTALLATION Installing the Console It is important determine where the control panel will be located. Please follow the criteria below to select the ideal location for the control panel.
TROUBLE SHOOTING INSTALLATION 4. Insert the rechargeable battery to the battery compartment. There are 2 different types of rechargeable battery for 2 markets: a. North American Version: Lead Acid Connect the 2 wires to the battery. Red wire connects to the “+” terminal on the battery. Black wire connects to the “-” terminal on the battery. Markings on the battery should face up. b. European Version: Ni-MH Plug in the wire from the battery to the battery socket inside the battery compartment. 5.
TROUBLE SHOOTING INSTALLATION Programming Passwords Control Panel Questions Solutions Master Password can be used for programming, arming, disarming the system, and telephone access. The default Master Password is [1234]. Why I can’t arm my system? I cannot arm the system even when no sensor is triggered, and the ARM LED is off. Why the ARM LED keeps flashing? Make sure none of the sensors are triggered. You can check this by the zone LEDs, none of them should blink.
INSTALLATION HOME AUTOMATION Phone Number Programming ® You can program up to 6 Emergency Phone Num bers. When the system is in panic, the control panel will call these phone numbers and announce its status. This row : Buttons to Disable Event Tigger The 6 emergency phone numbers include: - 5 voice message phone numbers - 1 Contact ID message phone number Zone LED : Off Press once will enable “Event Trigger On”, press again will enable “Event Trigger Off”.
HOME AUTOMATION Event Trigger You can control up to 5 different devices not only manually, but also automatically. It is called Event Trigger. That means when a sensor is triggered, the control panel will transmit a signal to activate the designated control module. Applications include: - Lights on when you open the front door (walking into a room, lights on automatically), this is called "Event Trigger on". from a room, turns lights off), this is called "Event Triggered off".
INSTALLATION HOME AUTOMATION Contact ID Phone number You can program a telephone number for calling to the central monitoring station. When the system is in panic, the control panel will call this phone number and will send out a Contact ID message with event code 140, which represents “General Alarm”.
HOME AUTOMATION INSTALLATION Operation Account Number Programming To turn off a light with the control panel: 1. Press the device number button on the control panel, i.e. pressing 1 will turn off device 1, pressing 2 will turn off device 2. 2. You will hear [Device X Off], where X is the device number. 3. You will also see the PROG LED flashing, indicating the control panel is sending out the wireless signal to control the specific device. 4.
INSTALLATION HOME AUTOMATION Deactivating the Digital Dialer Control Module [1] is represented by zone LED 1 You can deactivate the digital dialer by erase the phone number memory for central monitoring station. Step 1 Keys Function Description Press [PROG] Enter ProgramPress [MPIN] ming mode Press [1] Select phone number programming 3 Press [0] Enter phone memory 4 Press [ARM] Confirm delete the phone number.
HOME AUTOMATION OPERATION The Control Panel is always in one of the 2 operating modes: Part 1 Learn signal from Control Module to Control Panel Step 1 2 Keys Function [PROG] [MPIN] Description Enter Programming mode [4] Enter master password to programming mode Select learn control module programming 3 [1] to [5] Select the Select control module location location [1], [2], (Max. 5 control [3], [4], or [5]. modules) 4 Activate the control module by pressing its learn button once quickly.
OPERATION HOME AUTOMATION Mute When the alert beeping becomes undesired, you can terminate the beeping in 3 different ways: There are 3 ways to control these modules / receivers: 1. Mute button - Manual mute by pressing the mute button Pressing the mute button will temporary disable the beeping for all the activated sensors. For example, if a window with a window sensor will be open for a long period of time, the continuous beeping may become undesired.
ADVANCED PROGRAMMING OPERATION System Status ® Zone 1 Button [1] Button [6] This row : Buttons for Sensor 1 Zone 2 Button [2] Button [7] Zone LED : Flash once Zone 3 Button [3] Button [8] Zone 4 Button [4] Button [9] Zone 5 Button [5] Button [0] SENSOR 1 SENSOR 2 This row : Buttons for Sensor 2 Zone LED : Flash twice Erase Sensors Proceed to the following to erase a sensor. Keys 1 [PROG] [MPIN] Enter Enter master 3 beeps for v alid password.
ADVANCED PROGRAMMING OPERATION Note: - The control panel cannot be armed if there are triggered sensors. Make sure all sensors are in closed position, i.e. (close all doors, windows, no movement should be detected etc). - The control panel can be armed if there are sensors with low battery or failure warning.
ADVANCED PROGRAMMING Learn Sensors OPERATION 2. You must enter a valid password, either the Master Password, or Secondary Password to disarm the system before entry delay expires. You can program up to 10 sensors to the control panel. There are 5 zones on the control panel, each zone can program up to 2 sensors. Before programming a sensor, you must decide which sensor location (zone number and sensor number) you would like to program the sensor to.
OPERATION ADVANCED PROGRAMMING Remote [6] is represented by zone LED 1 Panic ® Pressing the panic button on the control panel will cause the siren to sound and outgoing calls will be made to the pre-programmed phone numbers, “System Panic” will also be announced. This can be used in any emergency situation. To stop the siren and disarm the system, user can enter a valid password. This will terminate the siren and the control panel from calling the rest of the emergency phone numbers.
OPERATION ADVANCED PROGRAMMING Learn Keychain / Keypad Remotes Sensor Failure Additional keychain or keypad remotes can be programmed to the control panel. Maximum of 5 keychain/keypad remotes can be programmed to the control panel. The control panel constantly monitors its sensors, if the control panel fails to communicate with any sensors, it will notify the user by: - Keychain or keypad remotes should be programmed to Device 6 to Device 0. 1.
ADVANCED PROGRAMMING OPERATION When the sensor is running low in battery, the sensor will send a wireless low battery signal to the control panel. The zone LED representing that sensor will be on steadily, indicating sensor(s) in that zone is in trouble condition. Control Panel will also have an announcement to advise the user the trouble condition is low battery, such as “zone X sensor Y low battery”, where X and Y represent the zone and sensor number. Please replace the battery of that sensor.
COMMUNICATION ADVANCED PROGRAMMING Receiving the Emergency Call DISABLE ENABLE AUTO MUTE AUTO MUTE If you are on the list as one of the recipients of the emergency call, you should read the following instructions carefully. You should also notify all the persons you will be calling so they know how to react when they receive the emergency call.
COMMUNICATION ADVANCED PROGRAMMING Remote Operation by Telephone Auto Mute The control panel can be operated while you are away from home. You can have access to the control panel with any touch tone phone to perform a variety of operations, listed below. When a sensor is triggered in alert mode, audio warning will be emitted, either beep or alarm. For example, if a door is opened, the beep will not stop until the door is closed. If the door is open for 2 hours, the beep will go on for 2 hours.
COMMUNICATION ADVANCED PROGRAMMING Table 1: Remote Phone Operations Follow the procedures below to program the beep / alarm setting. Step 1 2 3 Keys Function Description Enter Programming Enter master 3 beeps for valid password. mode password to 1 long beep for invalid programming mode password. [5] Select Beep / Alarm Setting After [5] is entered, some zone LEDs will flash or stay on. This indicates whether that zone is set to beep or alarm.
ADVANCED PROGRAMMING Advanced Programming allows users to customize the control panel to react differently under different conditions.
