PR-UN1670 (CNE-8206MB-RS) Operation Manual All Rights Reserved.
CONTENTS OPERATION MANUAL........................................................................................................................ 1 1 TOTAL SYSTEM............................................................................................................................. 3 1.1. 1.2. 2 OPERATIONS.................................................................................................................................5 2.1. 2.2. 3 ANALOG AUDIO.......................................
1 Total System 1.1.Analog Audio 1.2.
Speaker connection from 16pin harness White : Front left speaker+ White/Black : Front left speaker – Green : Rear left speaker+ Green/Black : Rear left speaker – Gray Gray/Black Purple Purple/Black The back side 4 : Front right speaker + : Front right speaker – : Rear right speaker + : Rear right speaker –
2 Operations 2.1.Panel buttons Functions of Buttons 1. [NAVI] Button • Press this button to enter navi app. • Press this button to back to the last page. 2. [HOME] Button • Press this button to main menu. • Press this button to back to the last source. 3. [SIRI] Button • Press this button to use the carplay siri. 4. [PWR] [VOL] Knob • Press this knob to turn on the unit. • Long press this knob to turn off the unit. • Rotate the knob to increase or decrease the volume.
7. Internal microphone for Bluetooth mode 8. Receiver for IR-remote control 9. Disc indicator • Disc inside: show white. • No disc inside: show the illumination color which was set in settings. 10. DVD/CD slot • Insert a disc with the label on the top side into the DVD/CD slot until it will be inserted automatically. 11. EJECT • Press this button to insert or eject a disc. 2.2.
• Press this button to eject the disc. [POWER/SRC] Button • Press this button to change source. • Press this button more than 1 second to power on when the unit is power off. • Press this button more than 1 second to power off when the unit is power on. [0 - 9] Buttons • Use in the Key Pad screen to select the radio or satellite radio. • Press to enter DVD video chapters/titles in the Key Pad screen. [VOLUME] Button • Increase or decrease volume.
Buttons • Press to manually select the next higher or lower station in Tuner and Satellite Radio modes. • Press to perform fast-forward or fast-backward searching. Press again to change the speed to 2x, 4x, 8x or 16x. • Press for movement of background source in Navigation mode. [ZOOM] Button • Press to turn on and zoom in while playing DVD. You can zoom in up to 3x. (No all DVD disc supports this function) [AUDIO] Button • Press to switch the AUDIO channel of the disc while playing DVD.
2) In case of restarting the ACC after 1), wait for more than 10 seconds before turning “ACC” switch on again. 1) 3.2.Title and Bottom 1. 2. 3. 4. 5. 6. Select the tab and enter the page Back to menu or back to the current audio source. Show the current time When BT connected, launch the phone voice Monitor-OFF / Monitor-ON Audio MUTE-OFF/ Audio MUTE-ON 3.3.Change Audio Source • To change audio source by touch screen: 1. Press “Home” button. Main menu will be displayed. 2.
• To change audio source by remote controller or SWC: 1. Press the “SRC” button, it will show next source toast. 2. Each time you continuously press the “SRC” button, active icon moves to the next. 3. If you don’t press the “SRC” button about 2 seconds, the source will be entered. *Note: If there is unavailable source, the icon will be disabled and the icon cannot be selected.
3. Press “MUTE” button of titlebar again 4 USB Mode 1. Connect a U-disk to the USB cable. 2. The system will automatically detect the connected U-disk. 3. Press the Audio [ ] button to display Audio files list. 4. Press the Video [ ] button to display Video files list. 5. Press the Picture [ ] button to display Picture files list.
9 8 10 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Previous Track /Fast Backward button. Play/Pause button. Next Track/Fast Forward button. Repeat button. Shuffle button. Direct Searching button. Track list button. Album Art. Current ID3 info area. Elapsed playing time indicator/Seek bar. USB Video Operations 7 1 2 3 4 1. Previous Video button 2.
3. Next Video button 4. Elapsed playing time indicator/Seek bar 5. Go to list menu mode 6. Hide Operation bar 7. Operation bar. USB Picture Operations 6 1 2 3 4 1. Previous picture button. 2. Play/Pause picture button. 3. Next picture button. 4. Go to list menu mode 5. Hide Operation bar and Shortcut bar 6. Operation bar.
1. Return to Main Menu 2. Time display 3. Frequency display, touch to automatically seek next station in the direction of higher frequencies 4. Station name 5. Loc/DX. It is used to set the station is local or dx. 6. Touch to change the next available sub channel 7. Voice dial, if the unit connect to a smart phone which can support this function this button can be enable 8. Change the back ground light 9. Mute button 10.Tune backward 11.Tune forward 12.ST flag 13.Sub-channel indicator 14.
6 SXM Operations This function is available when a Satellite Radio Receiver is connected through the dedicated connection.. Note: Satellite radio is a subscription service. Press the [SXM] button on Main Menu display. The system changes to the SXM. The SXM mode screen is displayed 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Channel up button. Play and pause button. Channel down button Show the channel is live. Choose channel list. Keypad Button. Channel category type. Channel list.
7 Settings Operation 7.1.Main Settings Press [Settings] button on the Main menu screen. The Setting menu screen will be displayed. Contains Main、Camera、Style、Tabs. 7.2.Set Bottom Tabs 1. A total of seven tabs are on the shortcut. Among them the third to the sixth users can customize. User can press [ or [ ] button to set different tabs. 2. ] While user sets tabs, the shortcut will be shown the same on each source. 7.3.Video Setup Menu TV Shape: Set TV Shape Normal or Cinema.
7.4.Audio Setup Menu This menu contains: EQ、Speaker、Sub-Out、Volume EQ: Set the audio sound effect Speaker: Set the balance and fader Sub-Out: Set the sound level and crossover Volume: Set the volume and preamp for sources 7.5.Right/Left Hand Drive Mode To change the location of home button of Apple CarPlay: 1. Go to “Video Setting” -> “CarPlay” menu. 2. Select “Left” or “Right”. 3. The location of home button will be changed. 8 iPod/iPhone Operations 1. 2. Connect iPod/iPhone to the USB cable.
3. Touch the iPod Audio icon. iPod Audio mode screen will be displayed. *Note1: The USB cable with the label of “iPod/iPhone” only supports iPod Audio mode. *Note2: When the device which does not support CarPlay or is disabled CarPlay on iPhone is connected, this system will work in the iPod Audio mode. 1 2 3 4 5 6 7 9 8 10 1. PREVIOUS • Touch the [ ] key to choose the previous track. • Touch and hold the [ 2. PLAY/PAUSE ] key to fast backward. • Touch the [ • Touch the [ 3.
• Touch the [ Information. ] key to display the current play list, touch again to display the ID3 8. ALBUM ART WORK 9. ID3 INFORMATION 10. PROCESS BAR • Touch the [ ] on seek bar and drag it to any position where you want to start playback. 9 Pandora Audio 1. 2. 3. 4. Launch Pandora application on your iPhone. Connect iPod/iPhone to the USB cable. (*Note2) The system will automatically detect the connected device. Touch the Pandora icon. Pandora mode screen will be displayed.
To go to Apple CarPlay screen • When you touch “Apple CarPlay” icon, “CarPlay” screen is displayed. • When you touch “iPod Audio” icon, “CarPlay now playing” screen is displayed and start playback music. To go to Apple CarPlay screen: (by hard button) • When you press and hold “MAP” button for more than 2 seconds, “CarPlay maps” screen is displayed. • When you press “VOICE” button, “Siri” screen is displayed. To go back to native screen: • Press “HOME” button, Main menu screen is displayed.
To start Siri (There are 2 ways to use Siri.) 1. 2. 3. 4. 5. Press “VOICE” button of panel. Press “VOICE” button of SWC. Press and hold “SRC” button of SWC or “SRC” button of remote controller more than 600 milliseconds. Siri screen will be displayed. Talk your request.
11Native Navigation To initialize: (First power-up timing only) Basically, just touch “Next” button. If you want, you can customize settings. To Set Destination 1. Touch Navigation MENU “ ” icon. 2. Touch “New Route” button. 3. There are several ways to select your destination. Choose one of them. 4. Touch the “Select as Destination”. 5. Touch the “Start Navigation”.
To Start Guidance Simulation 1. Touch Navigation MENU “ ” icon. 2. Touch “Route Summary” button. ” icon. 3. Touch “ 4. Select “Simulation”.
12 Bluetooth Operations 12.1. Bluetooth Paring 1. Turn on the power of the cellular phone you wish to register. 2. Touch the [ ] key to display the Device Select screen. 3. Touch the [Add] key to display the Inquiring Device screen. 12.2. Bluetooth Setting 1. Touch the [ ] key to display the Devices information on the screen. 2. Touch the [Setup] key to display the Setup information on the screen. 12.3. Telephone operations 1. Touch the [ ] key to display the Ten-Key pad screen. 2.
12.4. Bluetooth Audio Player Operations 1. 2. 3. Confirm that Bluetooth device is connected. Press “HOME” button and choose “A2DP” source. Bluetooth Audio mode screen will be displayed. Pausing playback • Touch the [ ] key during playback. Playback pauses. • To resume playback, touch the [ Skipping a track • Press the [ ] or [ ] key. Playback resumes. ] button during playback, Tracks are skipped.
*Note: If the reverse cable is connected correctly to the car, the head unit will go to camera mode automatically when the car is in reverses. 14 DISC Player Operations 1. 2. Confirm that a disc is inserted. Press “HOME” button and choose “Disc” source. Play Video 5 4 3 6 7 2 1 1. 2. 3. 4. 5. 6. 7. 8.
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Previous Track /Fast Backward button. Play/Pause button. Next Track/Fast Forward button. Repeat button. Shuffle button. Direct Searching button. Track list button. Album Art. Current ID3 info area. Elapsed playing time indicator/Seek bar. Source shortcut buttons. Playing picture files in disc 6 1 2 3 4 1. Previous picture button. 2. Play/Pause picture button.
3. Next picture button. 4. Go to list menu mode 5. Hide Operation bar and Shortcut bar 6. Operation bar. 15 HDMI Operations External peripheral devices, including android or iPhone etc. can be connected to the unit through HDMI Line. Then you can see the phone screen on the HDMI app, you can watch movie which in your phone on unit. 16 AUX 1 / AUX 2 Operations External peripheral devices, including a game console, camcorder, navigation unit, iPod/iPhone, etc.
WARNING For you safety,the driver should not watch any video sources and/or operate the controls while driving.Please note that watching and operating any video sources while driving are prohibited by law in some countries. Also, while driving, keep the volume to a level at which external sounds can be heard. Do not disassemble or modify this unit. It may cause an accident, fire, or electric shock.
