User's Manual Part 2

ManualsBrandsSKYPINE ELECTRONICS ManualsElectronicsCar Navigation Entertainment System

English

NX500/NZ50016

Discs

Playable discs

This DVD video player can play the following

discs.

About CD Extra discs

A CD Extra disc is a disc in which a total of two

sessions have been recorded. The ﬁrst session

is Audio session and the second session is Data

session.

Your personally-created CDs with more than

second data sessions recorded cannot be

played on this DVD video player.

Note:

• When you play a CD Extra disc, only the

ﬁrst session will be recognized.

About playing a CD-R/CD-RWdisc

(MP3, WMA)

This player can play CD-R/CD-RW discs

previously recorded in music CD format (MP3,

WMA) or video CD format.

About playing a DVD-R/RW or DVD+R/RW

disc

This player cannot play DVD-R/RW and DVD~R/

RW discs previously recorded in video CD

format.

However, MP3/WMA ﬁles recorded on DVD-R/

RW and DVD+R/RW discs can be played.

Discs that cannot be played back

This DVD video player cannot play back DVD-

Audio, DVD-RAM, Photo CDs, etc.

Note:

• It may also not be possible to play back CDs

recorded on a CD-R unit and CD-RW unit.

(Cause: disc characteristics, cracks, dust/dirt,

dust/dirt on player’s lens, etc.)

• If a CD-R or CD-RW disc that has not

been ﬁnalized is played, it will take a long

time to start playing. Also, it may not be

possible to play depending on its recording

conditions.

• You cannot play SuperAudio CDs. Playback of

the CD player is not supported even if it is a

hybrid disc.

About MP3/WMA playback

This unit can play back CD-R/CD-RW, DVD-R/

RW and DVD~R/RW discs on which MP3/WMA

music data have been recorded.

For a detailed information, see the section

entitled “Listening to MP3/WMA”.

Note on region numbers

The DVD video system assigns a region number

to DVD video players and DVD discs by sales

area. DVD video players sold in the United

States can play back DVD discs with the region

number

“ALL”, “1” or any combination of numbers that

also incorporate a “1”.

The DVD video region number is marked on the

disc jacket as shown below.

• This product incorporates copyright protection

technology that is protected by U.S. patents and other

intellectual property rights. Use of this copyright

protection technology must be authorized by Macrovision,

and is intended for home and other limited viewing uses

only unless otherwise authorized by Macrovision.

Reverse engineering or disassembly is prohibited.

• Windows Media

, and the Windows

logo are trademarks,

or registered trademarks of Microsoft Corporation in the

United States and/ or other countries.

• Manufactured under license from Dolby Laboratories.

• “Dolby”, “Pro Logic” and the double-D symbol are

trademarks of Dolby Laboratories.

• “Made for iPod” means that an electronic accessory has

been designed to connect speciﬁcally to iPod and has

been certiﬁed by the developer to meet Apple performance

standards.

“Works with iPhone” means that an electronic accessory

has been designed to connect speciﬁcally to iPhone

and has been certiﬁed by the developer to meet Apple

performance standards.

Apple is not responsible for the operation of this device or

its compliance with safety and regulatory standards.

iPod and iTunes

are trademarks of Apple Inc., registered

in the U.S. and

other countries.

iPhone is a trademark of Apple Inc.

DVD video discs

Audio CDs

MP3 ID3 TAG

WMA

Playable discs

ALL

About the registered marks, etc.

NX_NZ500 0608.indd 16 6/16/2009 8:05:38 AM

Summary of content (12 pages)

PAGE 1
Discs English Playable discs This DVD video player can play the following discs. Playable discs DVD video discs MP ID TAG Audio CDs WMA About CD Extra discs A CD Extra disc is a disc in which a total of two sessions have been recorded. The first session is Audio session and the second session is Data session. Your personally-created CDs with more than second data sessions recorded cannot be played on this DVD video player.
PAGE 2
English 6. OPERATIONS Basic Operations Note: • Be sure to read this chapter referring to the chapter “3. CONTROLS” CAUTION When the unit is turned on, starting and stopping the engine with its volume raised to the maximum level may harm your hearings. Be careful about adjusting the volume. Turning ON and OFF the Power Note: • Start the engine before using this unit. • Be careful about using this unit for a long time without running the engine.
PAGE 3
Basic Operations English Adjusting the volume Turn the volume knob to adjust the volume. Clockwise : Increases the volume. Counter- clockwise : Decreases the volume. • The volume level indicated in the display is in a range from 0 (min.) to 40 (max.). 4.Touch the [ ] key to return to the previous screen. * In the following sections, only the details regarding adjustments are described, procedures to select items are skipped.
PAGE 4
. Set up the time by touching the digital numbers on the screen. . Touch the [Clock Mode] to change time settings to 1 Hr or 4Hr. Select 1 Hr, than you can choose AM or PM mode. Adjusting the Radio region 1. Touch the [Radio Field] button in the Setup menu. . A region selection menu will appear. Scroll down using the arrow at the bottom of the menu. Scroll up using the arrow at the bottom of the menu. Select the area’s radio region that you are in.
PAGE 5
English 6. Enter the required information on the screens displayed in the order shown below. In order to proceed to the next sreen, press the “Check” button. 9. To set up navigation menu, see “Navigation set up “ in “Setup Operations” chapter. Reset to Factory Defaults 1. Press Setup to enter setting menu mode. . Press the Misc button. . Press Load Factory button. Select [YES] to restore your unit to factory default settings.
PAGE 6
English Radio Operations Listening to the Radio 1. Touch the Tuner button on the Main menu display. The tuner mode screen is displayed. . Press the [BAND] button or touch the [Band] key on remote control to select the radio band. Each time the button is pressed, the radio reception band changes in the following order: FM1 FM FM AM FM1... 5 1 6 7 4 1. . . 4. 8 14 9 15 10 16 17 11 1 18 19 0 1 1 Seek Tuning 1. Press the [BAND] button to select the radio band (FM or AM).
PAGE 7
Radio Operations English Preset Scan The Preset Scan receives the stations stored in the preset memory in order. This function is useful when searching for the desired station in memory. 1. Touch the [Band] key to select the desired band. (FM or AM) . Touch the [PS] key to start the Preset Scan. The unit starts scanning each station for 10 seconds sequentially. . When the desired station is tuned in, touch the [PS] key again to continue receiving that station.
PAGE 8
Setting up the password for parental level control The factory default setting is “0000”. 1. In Main Menu press Setup button. Press Misc button on the dispaly. Touch the Set Password ---- and a numerical key pad will appear. English DVD Video Player Operations slot the label side facing up. CAUTION For your safety, the driver should not insert or eject a disc, or operate the controls while driving. Note: • Never insert foreign objects into the disc insertion slot.
PAGE 9
DVD Video Player Operations English 1. . . 4. 5. 6. 7. MENU Button INFO Button A-B Repeat Button Repeat Button Subtitle Button Channel Button Back Button 8. 9. 10. 11. 1 . 1 . 14. Chap Button Previous Track Button Fast Backward Button Play/Pause Button Fast Forward Button Next Track Button Stop Button Operate the DVD Player menu You can select the button items displayed in the DVD menu by directly touching it.
PAGE 10
Using the Title Menu On DVD discs containing two or more titles, you can select from the title menu for playback. 1. Showing the DVD PLAYER mode screen, touch the [CHAP] key during playback. The title menu screen appears. *Depending on the disc, the title menu cannot be called. . Select the button items displayed in the title menu screen by the same way of the DVD menu operation. *Depending on the disc, items cannot be selected with the ten-key buttons.
PAGE 11
DVD Video Player Operations English LISTENING TO a CD 1 16 5 4 17 18 19 6 7 8 9 10 11 1 1. . . 4. 5. 6. 7. 8. 9. 10. 11. Mute Display Repeat Display Shuffle Display Time Display Back Button Keyboard Button Repeat Button Shuffle Button Previous Track Button Play/Pause Button Next Track Button 1 14 15 1 0 1 . 1 . 14. 15. 16. 17. 18. 19. 0. 1.
PAGE 12
Listening to MP3/WMA This unit is an ID Tag compatible model. This unit supports the ID TAGs of the Version .4, . , 1.1 and 1.0. In displaying, this unit gives priority to the Version . and .4 TAGs. After USB device inserted into USB slot, or disc is loaded, the play mode is automaticlly engaged. What is MP3/WMA? MP is an audio compression method and classified into audio layer of MPEG standards. WMA is an audio compression method developed by Microsoft Corporation.