User's Manual Part 2

English
NX500/NZ50018
Basic Operations
Adjusting the volume
Turn the volume knob to adjust the volume.
Clockwise : Increases the volume.
Counter- clockwise : Decreases the volume.
• The volume level indicated in the display is
in a range from 0 (min.) to 40 (max.).
While driving, keep the volume level at which
external sounds can be heard.
Mute
Press the [MUTE] [PWR] button to turn mute On
and Off.
Adjusting the Settings
1. Press [Setup] to enter setting menu mode.
2. Press the desired mode button.
Modes come in the following order:
• General, including
Clock settings, Beep,
Camera Image, Radio Field, Tel Mute, Tel
SP, Auxin Input SW, Version.
• Video, ASP, Navigation, Misc.
3. Perform the adjustment for the desired item.
See the following sections fo details.
Adjusting the Audio
1. Press the [EQ] button on the screen or
the [SEL] button on the remote control.
2. Touch the item key to adjust.
3. Perform the adjustment.
See the following sections for detail.
4.Touch the [ ] key to return to the previous
screen.
* In the following sections, only the details
regarding adjustments are described,
procedures to select items are skipped.
Adjusting the Balance/Fade
1. Touch the BALANCE or FADE in the
Audio Settings.
2. Touch the
[F] or [R] key to adjust to the
fader level.
• The factory default setting is “0”.
(Adjustment range: front 9 to rear -9)
3. Touch the [L] or [R] key to adjust to the
balance level.
• The factory default setting is “0”.
(Adjustment range: left -9 to right 9)
Adjusting the Bass
The bass gain and bass frequency can
be adjusted as follows.
1. Touch
[-] or [+] key to set the
desirable level.
Adjusting the Treble
The treble gain and treble frequency can
be adjusted as follows.
1. Touch
[-] or [+] key to set the desirable
level.
2. To set the treble center frequency, enter
the ASP adjustment in the SETUP menu.
CAUTION
NX_NZ500 0608.indd 18 6/16/2009 8:05:43 AM