User's Manual Part 2

English
NX500/NZ500 21
Seek Tuning
1. Press the [BAND] button to select the radio
band (FM or AM).
2. Touch the
[ ] or [ ] key to automatically
seek a station.
• When touching the [ ] key, the station is
sought in the direction of higher frequencies.
• When touching the
[ ] key, the station is
sought in the direction of lower frequencies.
Manual Tuning
1. Press the [BAND] button to select the radio
band (FM or AM).
2. Touch the [ ] or [ ] key to automatically
seek a station.
• When touching the
[ ] key, the station is
sought in the direction of higher frequencies.
• When touching the [ ] key, the station is
sought in the direction of lower frequencies.
Recalling a preset station
There are 2 ways to recall the preset station.
• Using the remote control:
1. Press the [BAND] button to select the
desire band (FM or AM) on the remote
control.
2. Press the preset number (1 to 6) on
numeric pad.
• Using the tuner unit:
1. Press the
[BAND] button to select the
desire band (FM or AM) on the tuner.
2. Press the preset station (1 to 5) on tuner
display.
3. Press
[ ] or [ ] to select next station up
or down the preset list.
4. Press
[AS] button to auto search and store
the stations.
Auto Store
The Auto Store is a function for storing up to 12
stations that are automatically tuned in
sequentially. If 12 receivable stations cannot be
received, a previously stored station remains
unoverwritten at the memory position.
1. Touch the
[Band] key to select the desired
band. (FM or AM)
2. Touch the [AS] key momentarily to start
the Auto Store function.
A beep sounds and the stations with good
reception are stored automatically to the
preset channels.
Listening to the Radio
1. Touch the Tuner button on the Main menu
display. The tuner mode screen is displayed.
2. Press the [BAND] button or touch the [Band]
key on remote control to select the radio
band. Each time the button is pressed, the
radio reception band changes in the following
order: FM1 FM2 FM3 AM FM1...
Radio Operations
15
14
13
12
11
10
9
8
76
16 17 18 19 20 21
5 1
3 42
1 . Tuner display
2. Signal intensity
3. Time display
4. Return to previous
screen
5. Band display
6. Loc/DX display
7. Stereo/Mono
signal mode
8. Preset list
9. Seek down
10. Tune down
11. Scan button
12. Tune Up
13. Seek Up
14. Band button
15. AS button
16. PS button
17. LOC/DX Button
18. Slide Bar (Use it
to hide some
function buttons)
19. Previous page
button
20. Next page button
21. EQ mode button
NX_NZ500 0608.findd 1 6/16/2009 8:05:49 AM