User's Manual Part 1

X
Call up the "System settings" menu
(Y page 21).
The entry on the right beside Language
shows the current setting.
X
Press Language.
The list of languages appears. The cur-
rently selected language is identified
by the O symbol.
X
Press 9 or : to scroll in the list.
X
Select the desired language.
The smart high line radio loads the lan-
guage and switches back to the "System
settings" menu.
Selecting a keyboard
The keyboard selection affects the selec-
tion options in the input menus (keyboard
layout, special character entry).
You can select the following keyboard set-
tings:
R
Alphabetical
R
German (German "QWERTZ" computer key-
board)
R
English (UK)
R
French
R
Cyrillic
X
Call up the "System settings" menu
(Y page 21).
The entry on the right beside Keyboard
shows the current setting.
X
Press Keyboard.
A list appears.
X
Select the desired keyboard.
The smart high line radio loads the key-
board and switches back to the "System
settings" menu.
Setting the standby time
The smart high line radio uses less power
in standby mode (energy-saving operating
mode).
The smart high line radio switches to
standby mode after it has been switched
off. In this mode, the device is ready for
use quickly after being switched on again.
Standby mode is terminated after a defined
time period (standby time). The device is
then switched off. You can set the standby
time individually.
i
The standby time is preset to 18 h. Set-
ting a low standby time is recommended,
for example, when the battery charge is
low.
If the smart high line radio is operated
while the engine is switched off, the
device also goes into standby mode after
30 minutes. You will see a warning mes-
sage to this effect.
X
Call up the "System settings" menu
(Y page 21).
The entry on the right beside Standby
time shows the current setting.
X
Press Standby time in the menu.
A settings menu appears.
X
Press = or Ì to adjust the standby
time. You can select values between 1 and
24 h.
X
Press OK.
The smart high line radio accepts the
value and switches back to the "System
settings" menu.
Changing the security code
Entering a four-digit security code serves
to protect against theft. The security code
must be entered after disconnecting the
battery, for example.
The security code is set to "0000" at the
factory. It is recommended that you change
the security code.
X
Call up the "System settings" menu
(Y page 21).
X
Press Security code.
An input menu appears for the entry of the
current security code.
X
To enter the current (old) code: press the
numbers one after another.
22
>> smart high line radio.