User's Manual Part 1

Adjusting the volume for navigation
announcements
X
Turn cVd the control knob during a traf-
fic announcement.
or
X
Set the volume of traffic announcements
compared to the volume of the active
audio source (Y page 15).
The volume of the active audio source is
lowered to the selected value for the
duration of the navigation announce-
ment.
Selecting traffic jam avoidance (Expert
mode)
X
Press the arrow at the bottom left of the
map (Y page 38).
The "Navigation" main menu appears.
X
Press Route options.
The "Route options" menu appears. The
by pass option shows the current set-
ting.
X
Press by pass.
A menu appears.
X
Press none, manual or automatic.
Selection Explanation
none
Traffic jams are not taken
into account for route guid-
ance.
manual
The selected traffic jam
section and additional
information are shown on
the map. However, no new
route is calculated.
automatic
The smart high line radio
calculates a detour if TMC
traffic announcements are
received.
i
In Easy mode, the stand-
ard setting is automatic.
Route information (Expert mode)
Calling up the "Route information" menu
X
Press the arrow at the bottom left of the
map (Y page 38).
The "Navigation" main menu appears.
X
Press Route information.
The "Route information" menu appears.
Calling up a route list
X
Press Directions in the "Route infor-
mation" menu.
The route list shows the street sections
to be driven on.
X
Press 9 or : to scroll in the list.
X
To close the route list: press &.
Checking the traffic conditions
X
Press Traffic information in the
"Route information" menu.
The list shows the current TMC traffic
announcements. Traffic announcements
with a red symbol affect the current
route, traffic announcements with a grey
symbol apply to other sections of road.
>> smart high line radio.
41
Z