User's Manual Part 1

i
The list can be displayed by clicking
on the TMC symbol on the top right-hand
side of the display (Y page 38). The dis-
play does not depend on the RDS TMC
radio station currently playing.
X
To close the list: press &.
Setting the map to a route position
X
Press Go to... in the "Route options"
menu (Y page 41).
A menu appears.
X
Press Current position, Destination
area, Overview or Starting point.
The map shows the route section with the
selected route position or a complete
overview of the route.
Blocking a section of the route
It is possible to block more than one route
section. The number of active blocks can be
seen in the "Length of block" and "Start of
block" lists at the top right.
X
Press Avoid route in the "Route infor-
mation" menu (Y page 41).
The "Length of block" list appears.
X
Press a selection option, e.g. 5 km, to
select the extension of the block.
The "Start of block" list appears.
X
Press Immediately or another selection
option to determine when the block
should start.
The route section is blocked. The route
is recalculated.
X
To delete blocks: Press 1 at the bottom
right in the "Length of block" list.
Starting route simulation
X
Press Simulation mode in the "Route
information" menu (Y page 41).
The route is shown from the start (or pre-
vious position) to the destination.
Displaying trip info
X
Press Trip info in the "Route informa-
tion" menu (Y page 41).
You see the following information:
R
Maximum speed
R
Average speed
R
distance covered
R
driving time
R
total remaining driving time
R
total remaining journey distance
The bar underneath shows the following
information:
R
current height above sea level
R
current time (if route guidance is not
active) or remaining journey time to
next destination (intermediate stop,
final destination)
42
>> smart high line radio.