User's Manual

OPERATING PROGRAM
Here is the detailed procedure to make the charger work. All the screens and operations
will take Li-Po BALANCE CHARGE program for example,
Note: We will explain one channel as the operating procedure
of Channel A, B, C and D is identical.
1. Connection
Connecting to power source
There are two kinds of inputs for SKYRC Q200, DC 11-18V and AC 100-240V.
A. Operating in AC mode
SKYRC Q200 comes with built in switching power supply. You can connect the AC
power cord directly to the main AC socket. (100-240V AC).
1).
11 ·
Q200
In AC mode, it supports Power Distribution. You could set the AC Max Power for
one channel (Take Channel A for example)as following,
BATT/PROGRAM
SYSTEM SETTING->
LIPO BALANCE
2.0A 7.4V(2S)
A
B
LIPO BALANCE
2.0A 7.4V(2S)
C
LIPO BALANCE
2.0A 7.4V(2S)
D
LIPO BALANCE
2.0A 7.4V(2S)
A
B
LIPO BALANCE
2.0A 7.4V(2S)
C
LIPO BALANCE
2.0A 7.4V(2S)
D
Safety Timer
ON 120Min
LIPO BALANCE
2.0A 7.4V(2S)
A
B
LIPO BALANCE
2.0A 7.4V(2S)
C
LIPO BALANCE
2.0A 7.4V(2S)
D
AC Max Power Set
50W
LIPO BALANCE
2.0A 7.4V(2S)
A
B
C
LIPO BALANCE
2.0A 7.4V(2S)
D
AC Max Power Set
65W
AC Max Power Set
35W
And the other channel (Channel C) will take the rest power automatically (For example, if
you set channel A as AC 65W, the channel C will be AC 35W).
If Channel A and Channel C are both charging, you can’t change the AC power.
If Channel A is charging, you can change AC power of Channel C and Channel
A will take the rest power automatically.
NOTE1:
NOTE2: