User's Manual

03 ·
Q200
Four-channel Charger
SKYRC Q200 allows you to plug 4 batteries into one charger simultaneously, and it will
intelligently and automatically charge 4 battries at once to their maximum capacity. To top
of it, the batteries being charged do not even need to have the same configuration. You
can connect different chemistry(NiMH/NiCd/LiPo/LiFe/Lilon/LiHV/Pb)batteries into any of
the charging channels.
Dual Input and Power Distribution
The input of SKYRC Q200 is AC 100-240V and DC 11-18V.
In AC mode, it supports power distribution.
Please refer to below table for detailed distributed power value in different channels.
SPECIAL FEATURES
Colorful LCD Display
It is equipped with 480*320 3.5" colorful LCD display. The user interface looks clear,
visible and comfortable.
CH A
CH B CH C CH D
DC Mode
Charging Power
0-100W 0-100W 0-50W 0-50W
AC Mode
Charging Power
50-100W 50-100W 0-50W 0-50W
Power Distribution
A+C=100W
B+D=100W
A+C=100W
B+D=100W
Optimized Operating Software
SKYRC Q200 features the so-called AUTO function that set the feeding current during the
process of charging or discharging. Especially for lithium batteries, it can prevent the
overcharging which may lead to an explosion due to the user's fault. It can disconnect the
circuit automatically and alarm once detecting any malfunction. All the programs of this
product were controlled through two way linkage and communication, to achieve the
maximum safety and minimize the trouble. All the settings can be configured by users!